Details

---

BUY LMC6082IMX/NOPB https://www.utsource.net/itm/p/12380889.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	1.8	-	5.5	V
Supply Current (Quiescent)	IQ	-	20	-	渭A
Input Bias Current	IB	-	2	-	pA
Input Offset Current	IOS	-	0.3	-	pA
Input Voltage Range	VIN	0	-	VCC	V
Output Voltage Swing	VOUT	0.1	-	VCC - 0.1	V
Slew Rate	SR	-	0.4	-	V/渭s
Gain Bandwidth Product	GBP	-	1.2	-	MHz
Common Mode Rejection Ratio	CMRR	-	110	-	dB
Power Supply Rejection Ratio	PSRR	-	110	-	dB
Operating Temperature Range	TA	-40	-	125	掳C
Storage Temperature Range	TSTG	-65	-	150	掳C

Instructions for Using LMC6082IMX/NOPB

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 1.8V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Input Bias and Offset Current:

   • The input bias current is very low (2 pA typical), making the LMC6082 suitable for high-impedance applications.
   • Keep the input offset current in mind when designing circuits to minimize errors.

3. Input Voltage Range:

   • The input voltage can range from 0V to the supply voltage (V_CC).
   • Avoid exceeding these limits to prevent damage to the device.

4. Output Voltage Swing:

   • The output voltage can swing from 0.1V above ground to 0.1V below the supply voltage.
   • Ensure the load connected to the output can handle this range.

5. Slew Rate:

   • The slew rate is 0.4 V/渭s, which is important for high-frequency applications.
   • Design your circuit to accommodate this rate to avoid distortion.

6. Gain Bandwidth Product:

   • The gain bandwidth product is 1.2 MHz, which helps in determining the maximum frequency at which the op-amp can operate with a given gain.

7. Common Mode Rejection Ratio (CMRR):

   • A CMRR of 110 dB indicates excellent rejection of common-mode signals, making the op-amp suitable for differential amplification.

8. Power Supply Rejection Ratio (PSRR):

   • A PSRR of 110 dB means the op-amp is highly insensitive to power supply variations, ensuring stable operation.

9. Operating and Storage Temperature:

   • The operating temperature range is -40掳C to 125掳C, and the storage temperature range is -65掳C to 150掳C.
   • Ensure the device is used and stored within these limits to maintain reliability.

10. Handling and Mounting:

    • Handle the device with care to avoid static discharge, which can damage the sensitive components.
    • Follow proper soldering techniques and ensure good thermal management if the device will be used in high-temperature environments.

By following these parameters and instructions, you can effectively use the LMC6082IMX/NOPB in your electronic designs.

(For reference only)