Details

---

BUY MC9S08AW16CFGE https://www.utsource.net/itm/p/12381092.html

Parameter	Description	Value/Range
Device	Microcontroller	MC9S08AW16CFGE
Family	S08AW
Architecture	8-bit HCS08 Core
Package	LQFP-48 (7x7)
Operating Voltage	Supply Voltage (VDD)	2.95 V to 5.5 V
Operating Temperature	Junction Temperature (TJ)	-40掳C to +85掳C
Flash Memory	Program Memory	16 KB
RAM	Data Memory	1 KB
Clock Speed	Internal Clock (IRC)	Up to 40 MHz
Peripheral Modules	- 1 x SCI (Serial Communication Interface)
	- 1 x SPI (Serial Peripheral Interface)
	- 1 x I2C (Inter-Integrated Circuit)
	- 1 x 8-channel 10-bit ADC
	- 1 x 16-bit Timer/Counter (TCU)
	- 1 x Watchdog Timer (WDT)
	- 1 x Low-Voltage Detect (LVD)
GPIO Pins	General Purpose Input/Output Pins	32
Power Consumption	Active Mode (Typical at 32 MHz, 3.3 V)	10 mA
	Sleep Mode (Typical at 3.3 V)	1 渭A
Programming Interface	In-Circuit Serial Programming (ICSP)
Package Marking	Device Identification	MC9S08AW16CFGE

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.95 V to 5.5 V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Clock Configuration:

   • The device can operate with an internal clock (IRC) up to 40 MHz.
   • External crystal or oscillator can be used for more precise timing if needed.

3. Programming:

   • Use the In-Circuit Serial Programming (ICSP) interface for programming the flash memory.
   • Ensure the programming tool is compatible with the HCS08 architecture.

4. Peripheral Initialization:

   • Initialize the peripheral modules (SCI, SPI, I2C, ADC, TCU, WDT, LVD) as required by your application.
   • Refer to the device datasheet for specific initialization routines.

5. GPIO Configuration:

   • Configure the GPIO pins as inputs or outputs based on your application needs.
   • Use pull-up or pull-down resistors as necessary to ensure stable logic levels.

6. Power Management:

   • Utilize sleep modes to reduce power consumption when the microcontroller is idle.
   • Monitor the Low-Voltage Detect (LVD) feature to prevent operation under low voltage conditions.

7. Environmental Considerations:

   • Operate the device within the specified temperature range (-40掳C to +85掳C) to ensure reliable performance.
   • Protect the device from excessive humidity and static electricity.

8. Debugging:

   • Use an in-circuit debugger to monitor and debug your application.
   • Ensure the debugger is connected to the appropriate debug pins on the microcontroller.

For detailed information and specific implementation details, refer to the MC9S08AW16CFGE datasheet and user manual provided by NXP Semiconductors.

(For reference only)