Details

---

BUY OPA541SM https://www.utsource.net/itm/p/12381189.html

Below is the parameter table and instructions for the OPA541SM operational amplifier:

OPA541SM Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	-30	卤15	36	V
Input Voltage Range	VI	-29.5		29.5	V	VCC = 卤15V
Output Voltage Swing	VO	-14.5		14.5	V	VCC = 卤15V, RL = 2k惟
Input Offset Voltage	VOS	-2.5	0.75	4	mV	VCC = 卤15V
Input Bias Current	IB	-1.5	0.5	2.5	渭A	VCC = 卤15V
Input Offset Current	IOS	-0.3	0.1	0.3	渭A	VCC = 卤15V
Slew Rate	SR		4000		V/渭s	VCC = 卤15V
Gain Bandwidth Product	GBP		800		kHz	VCC = 卤15V
Large Signal Voltage Gain	AV		100000		V/V	VCC = 卤15V
Power Dissipation	PD		1.5	2.5	W	VCC = 卤15V
Operating Temperature Range	TA	-40		85	掳C
Storage Temperature Range	TSTG	-65		150	掳C

Instructions for Using OPA541SM

1. Supply Voltage:

   • The OPA541SM can operate with a supply voltage range from 卤15V to 卤36V. Ensure that the power supply is stable and within these limits to avoid damage to the device.

2. Input Voltage:

   • The input voltage should be within the range of -29.5V to +29.5V when operating at 卤15V supply. Exceeding this range can lead to clipping or damage.

3. Output Voltage Swing:

   • The output voltage swing is typically 卤14.5V with a load resistance of 2k惟. Ensure that the load does not exceed the maximum output current capability of the device.

4. Input Offset Voltage:

   • The input offset voltage is typically 0.75mV. Use a precision resistor network to minimize the effect of this offset if high accuracy is required.

5. Input Bias Current:

   • The input bias current is typically 0.5渭A. Use high-impedance sources to minimize the effect of this current on the circuit.

6. Slew Rate:

   • The slew rate is 4000V/渭s. This parameter is crucial for high-frequency applications to ensure that the output can follow rapid changes in the input signal.

7. Gain Bandwidth Product:

   • The gain bandwidth product is 800kHz. This determines the maximum frequency at which the amplifier can achieve a certain gain without significant phase shift or distortion.

8. Power Dissipation:

   • The power dissipation is up to 2.5W. Ensure proper heat sinking to prevent overheating, especially in high-power applications.

9. Operating Temperature:

   • The operating temperature range is -40掳C to 85掳C. Avoid operating the device outside this range to prevent performance degradation or failure.

10. Storage Temperature:

    • The storage temperature range is -65掳C to 150掳C. Store the device in a dry, cool place to ensure long-term reliability.

11. Handling Precautions:

    • The OPA541SM is sensitive to electrostatic discharge (ESD). Handle the device with appropriate ESD protection measures, such as using grounded wrist straps and anti-static mats.

12. Mounting:

    • When mounting the OPA541SM on a PCB, ensure that the thermal vias and heat sinks are properly designed to dissipate heat effectively.

By following these parameters and instructions, you can ensure optimal performance and longevity of the OPA541SM operational amplifier in your application.

(For reference only)