Details

---

BUY HCPL-3120-560E https://www.utsource.net/itm/p/12381205.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Forward Voltage	VIF	-	1.2	1.4	V	@ IF = 20 mA
Input Current	IF	-	20	50	mA	Continuous
Peak Pulse Current	IFPK	-	-	100	mA	t < 1 ms
Output Collector-Emitter Voltage	VCE(O)	-	-	30	V	Output Off
Output Collector Current	IC	-	-	5	mA	@ VCE = 5V, VIF = 1.2V
Isolation Voltage	VI	-	-	1500	Vrms	1 min, 50/60 Hz
Storage Temperature	TS	-40	-	85	掳C
Operating Temperature	TA	-40	-	105	掳C

Instructions for Use:

1. Power Supply:

   • Ensure that the input forward voltage (V_IF) is within the specified range to avoid damage to the device.
   • The input current (I_F) should not exceed the maximum continuous rating of 50 mA.

2. Pulse Handling:

   • For short pulses, the peak pulse current (I_FPK) can be as high as 100 mA, but only for durations less than 1 ms.

3. Output Configuration:

   • When the output is off, the collector-emitter voltage (V_CE(O)) should not exceed 30 V.
   • The output collector current (I_C) should be kept below 5 mA to ensure reliable operation.

4. Isolation:

   • The device provides isolation up to 1500 Vrms for 1 minute at 50/60 Hz. Ensure that this isolation voltage is not exceeded to prevent breakdown.

5. Temperature Considerations:

   • Store the device within the temperature range of -40掳C to 85掳C.
   • Operate the device within the temperature range of -40掳C to 105掳C to ensure proper functionality.

6. Handling and Installation:

   • Handle the device with care to avoid static damage.
   • Follow standard soldering procedures and avoid excessive heat during installation.

7. Testing:

   • Before integrating the device into a circuit, test it under controlled conditions to ensure it meets the required specifications.

8. Compliance:

   • Ensure that the application complies with all relevant safety and regulatory standards.

(For reference only)