Details

---

BUY SKKQ1200/14E https://www.utsource.net/itm/p/12382532.html

Parameter	Value
Part Number	SKKQ1200/14E
Type	Thyristor
Maximum Repetitive Peak Off-State Voltage (VDRM)	1200 V
Maximum RMS On-State Current (IT(RMS))	14 A
Maximum Non-Repetitive Peak On-State Current (ITSM)	280 A
Gate Trigger Current (IGT)	50 mA
Holding Current (IH)	10 mA
Power Dissipation (PD)	130 W
Case Type	TO-220
Operating Temperature Range (TJ)	-40°C to 125°C
Storage Temperature Range (TSTG)	-55°C to 150°C

Instructions:

1. Installation and Handling:

   • Handle the device with care to avoid damage to the leads and body.
   • Ensure that the mounting surface is clean and free from debris before installation.

2. Mounting:

   • Use a heat sink if necessary, especially for applications where the device will be operating near its maximum temperature limits.
   • Torque the mounting screws to the manufacturer’s recommended specifications to ensure proper thermal contact without damaging the component.

3. Electrical Connections:

   • Connect the anode, cathode, and gate terminals according to the circuit diagram provided in your application design.
   • Ensure all connections are secure and insulated as required to prevent short circuits.

4. Operational Considerations:

   • Do not exceed the maximum ratings listed in the parameter table.
   • Provide adequate cooling to maintain the junction temperature within specified limits.
   • Ensure the gate trigger current (IGT) is sufficient to reliably turn on the thyristor.

5. Storage:

   • Store in a dry, cool environment to prevent corrosion and damage.
   • Keep away from sources of electromagnetic interference which could affect performance.

(For reference only)