Details

---

BUY TS944IDT https://www.utsource.net/itm/p/12382557.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Continuous Operation	4.5	5.0	5.5	V
Output Current	IO	Continuous Operation	-	25	100	mA
Input Voltage Range	VI	Input High Level	2.0	-	5.5	V
Input Voltage Range	VI	Input Low Level	0	-	0.8	V
Propagation Delay Time	tpd	Input to Output	6	-	15	ns
Power Dissipation	PD	Continuous Operation	-	-	375	mW
Operating Temperature	TA	Storage	-40	-	85	掳C
Storage Temperature	TSTG	Non-Operating	-40	-	125	掳C

Instructions for TS944IDT

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Output Current (I_O):

   • The maximum continuous output current should not exceed 100mA. For reliable operation, it is recommended to stay below 25mA.

3. Input Voltage Range (V_I):

   • For a high input level, the voltage should be between 2.0V and 5.5V.
   • For a low input level, the voltage should be between 0V and 0.8V.

4. Propagation Delay Time (t_pd):

   • The propagation delay time from input to output should be within 6ns to 15ns.

5. Power Dissipation (P_D):

   • The maximum power dissipation should not exceed 375mW to prevent overheating and potential damage.

6. Operating Temperature (T_A):

   • The operating temperature range is from -40掳C to 85掳C. Ensure the device is used within this range to maintain reliability.

7. Storage Temperature (T_STG):

   • The storage temperature range is from -40掳C to 125掳C. Store the device in a dry and cool environment to prevent degradation.

8. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Store the device in its original packaging to protect it from moisture and physical damage.

9. Mounting and Soldering:

   • Follow the recommended soldering profile to ensure proper mounting and to avoid thermal shock.
   • Use a temperature-controlled soldering iron and avoid excessive heat exposure.

10. Testing and Verification:

    • After installation, verify the supply voltage, input signals, and output signals to ensure the device is functioning correctly.
    • Use a multimeter or oscilloscope to measure the parameters and compare them with the specifications provided.

(For reference only)