Details

---

BUY IS64WV102416BLL-10MA3 https://www.utsource.net/itm/p/12382888.html

Parameter	Description
Device Type	SRAM (Static Random Access Memory)
Manufacturer	ISSI (Integrated Silicon Solution, Inc.)
Part Number	IS64WV102416BLL-10MA3
Memory Size	1024 K x 16 bits
Interface	SPI (Serial Peripheral Interface)
Supply Voltage (Vcc)	1.7V to 3.6V
Operating Temperature	-40°C to +85°C
Package Type	TSSOP (Thin Shrink Small Outline Package)
Pin Count	20 pins
Access Time	10 ns
Data Retention	20 years
Standby Current	20 μA (max)
Active Current	35 mA (max)

Instructions for Use

1. Power Supply Requirements:

   • Ensure the supply voltage is within the specified range of 1.7V to 3.6V.
   • Connect Vcc and GND to appropriate power rails.

2. Clock Configuration:

   • The device operates with a clock signal. Ensure the clock frequency is compatible with the access time requirements.

3. SPI Communication Setup:

   • Configure the SPI interface parameters (clock polarity, clock phase, data order).
   • Connect the SPI lines (MOSI, MISO, SCK, CS) as per the pin diagram provided in the datasheet.

4. Initialization:

   • After powering up, initialize the device by sending the necessary command sequences as detailed in the datasheet.

5. Read/Write Operations:

   • Perform read/write operations using the appropriate SPI commands.
   • Ensure proper timing and address alignment for successful memory transactions.

6. Power Management:

   • To minimize power consumption, use the standby mode when the device is not actively being used.
   • Transition between active and standby modes using the provided control signals.

7. Handling Precautions:

   • Handle the component with care to avoid damage from electrostatic discharge (ESD).
   • Follow the recommended soldering and mounting guidelines to ensure reliable operation.

For detailed specifications and additional instructions, refer to the official datasheet provided by ISSI.

(For reference only)