Details

---

BUY MCM6810P https://www.utsource.net/itm/p/12387975.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	Vcc	4.75	5	5.25	V
Supply Current (Quiescent)	Icc	-	300	-	μA
Output High Voltage	VOH	2.4	-	Vcc	V
Output Low Voltage	VOL	0	-	0.4	V
Input High Voltage	VIH	2	-	Vcc	V
Input Low Voltage	VIL	0	-	0.8	V
Propagation Delay Time	tpd	-	15	-	ns
Power Dissipation	PD	-	-	500	mW
Operating Temperature	Ta	-40	-	85	°C
Storage Temperature	Tstg	-65	-	150	°C

Instructions for Using MCM6810P

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.75V to 5.25V.
   • The quiescent current (Icc) should be around 300μA.

2. Input and Output Levels:

   • For a valid high input (VIH), the voltage must be between 2V and Vcc.
   • For a valid low input (VIL), the voltage must be between 0V and 0.8V.
   • The output high voltage (VOH) will be at least 2.4V when Vcc is applied.
   • The output low voltage (VOL) will be no more than 0.4V when Vcc is applied.

3. Timing:

   • The propagation delay time (tpd) is typically 15ns. This is the time it takes for the output to change state after the input changes.

4. Thermal Management:

   • The operating temperature (Ta) should be kept between -40°C and 85°C.
   • The storage temperature (Tstg) can range from -65°C to 150°C.

5. Power Dissipation:

   • The maximum power dissipation (PD) is 500mW. Ensure adequate heat sinking if operating near this limit.

6. Handling:

   • Handle the MCM6810P with care to avoid static damage. Use proper ESD protection measures.
   • Avoid exposing the device to excessive mechanical stress or moisture.

7. Mounting:

   • Follow the recommended PCB layout and soldering guidelines to ensure reliable operation.
   • Ensure proper grounding and decoupling capacitors are used to minimize noise and improve stability.

8. Testing:

   • Before final assembly, test the MCM6810P in a controlled environment to verify its functionality and performance parameters.

By following these guidelines, you can ensure optimal performance and reliability of the MCM6810P in your application.

(For reference only)