Details

---

BUY 7MBP50RA120-55 https://www.utsource.net/itm/p/12398875.html

Parameter	Description	Value
Part Number	7MBP50RA120-55	-
Type	IGBT Module	-
Voltage Rating (Vces)	Collector-Emitter Breakdown Voltage	1200 V
Current Rating (Ic)	Continuous Collector Current	50 A
Switching Frequency	-	Up to 20 kHz
Thermal Resistance (Rth(j-c))	Junction to Case	0.15 K/W
Operating Temperature Range	-	-40°C to +150°C
Package	-	D2PAK
Pin Configuration	-	3-Pin (Collector, Emitter, Gate)

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within safe operating limits.
   • Use thermal grease or thermal pad between the module and the heatsink for better thermal conductivity.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply.
   • Connect the emitter (E) to the load and the negative supply.
   • Connect the gate (G) to the control circuit.

3. Gate Drive:

   • Use a gate driver with appropriate voltage levels (typically 15V to 20V).
   • Ensure the gate resistor is properly selected to limit current and prevent oscillations.

4. Overcurrent Protection:

   • Implement overcurrent protection to avoid damage due to excessive current.
   • Use fast-acting fuses or current limiting circuits.

5. Thermal Management:

   • Monitor the temperature of the heatsink and ensure it does not exceed the maximum operating temperature.
   • Consider forced air cooling or liquid cooling for high-power applications.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

7. Handling Precautions:

   • Use ESD (Electrostatic Discharge) protection when handling the module.
   • Avoid touching the pins directly; use appropriate tools and gloves.

8. Testing:

   • Perform initial testing at low power to ensure correct operation before full-scale implementation.
   • Use a multimeter to check continuity and resistance values to verify connections.

(For reference only)