Details

---

BUY SMDJ36CA https://www.utsource.net/itm/p/12398996.html

Parameter	Value
Type	Transient Voltage Suppression (TVS) Diode Array
Package	SOD-123FL
Operating Temperature	-55°C to +150°C
Storage Temperature	-65°C to +150°C
Reverse Standoff Voltage (Vrwm)	36V
Maximum Clamping Voltage (Vc)	59.7V
Peak Pulse Current (Ipp)	18.4A
Capacitance (Ct)	30pF at 1MHz
Reverse Leakage Current (Ir)	1μA at Vrwm
Response Time (tr)	1ps
Mounting Type	Surface Mount
Polarity	Unidirectional

Instructions for Use:

1. Handling and Storage:

   • Store in a dry environment within the specified storage temperature range.
   • Handle with care to avoid damage to the leads and body.

2. Mounting:

   • Ensure the correct orientation of the diode during soldering.
   • Use a reflow soldering process suitable for the SOD-123FL package.
   • Avoid excessive thermal stress during soldering.

3. Electrical Connections:

   • Connect the diode between the protected circuit and ground.
   • Ensure that the reverse standoff voltage (Vrwm) is not exceeded under normal operating conditions.

4. Thermal Management:

   • Ensure adequate heat dissipation to prevent the diode from exceeding its maximum operating temperature.
   • Consider using a heatsink if necessary.

5. Testing:

   • Test the diode after installation to ensure proper functionality.
   • Verify that the capacitance and leakage current are within specified limits.

6. Safety:

   • Follow all safety guidelines when handling and testing the diode.
   • Ensure that the diode is properly grounded to protect against electrical hazards.

(For reference only)