MC74HC1G14DTT1G

MC74HC1G14DTT1G


Specifications
SKU
12399497
Details

BUY MC74HC1G14DTT1G https://www.utsource.net/itm/p/12399497.html

Parameter Symbol Conditions Min Typical Max Unit
Supply Voltage VCC Operating 2.0 - 6.0 V
Input Low Voltage VIL - 0.3 * VCC - - V
Input High Voltage VIH - - - 0.7 * VCC V
Output Low Voltage VOL IOL = 4 mA - - 0.4 V
Output High Voltage VOH IOH = -0.4 mA - - VCC - 0.2 V
Propagation Delay Time (Low to High) tPLH VCC = 4.5 V, fIN = 1 MHz - 10 - ns
Propagation Delay Time (High to Low) tPHL VCC = 4.5 V, fIN = 1 MHz - 10 - ns
Power Dissipation PTOT Maximum - - 340 mW
Operating Temperature Range TA - -40 - 85 °C
Storage Temperature Range TSTG - -65 - 150 °C

Instructions for Use:

  1. Supply Voltage: The device operates within a supply voltage range of 2.0V to 6.0V. Ensure the power supply is stable and within this range to avoid damage or incorrect operation.
  2. Input Voltage Levels:
    • Input Low Voltage (VIL): Should be less than or equal to 0.3 * VCC.
    • Input High Voltage (VIH): Should be greater than or equal to 0.7 * VCC.
  3. Output Voltage Levels:
    • Output Low Voltage (VOL): Should not exceed 0.4V when sourcing 4mA.
    • Output High Voltage (VOH): Should be at least VCC - 0.2V when sinking 0.4mA.
  4. Propagation Delay:
    • The propagation delay times (tPLH and tPHL) are typically 10ns at VCC = 4.5V and fIN = 1MHz. These values can vary with different supply voltages and input frequencies.
  5. Power Dissipation: The maximum power dissipation is 340mW. Ensure adequate heat dissipation if operating near this limit.
  6. Temperature Ranges:
    • Operating Temperature (TA): The device can operate between -40°C and 85°C.
    • Storage Temperature (TSTG): The device can be stored between -65°C and 150°C without damage.

Additional Notes:

  • Always ensure that the input signals are within the specified voltage levels to prevent damage to the device.
  • For reliable operation, keep the device within its specified temperature ranges.
  • Proper decoupling capacitors should be used near the power supply pins to filter out noise and ensure stable operation.
(For reference only)

View more about MC74HC1G14DTT1G on main site