Details

---

BUY fan7387 https://www.utsource.net/itm/p/12401415.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	Vcc	4.5	-	20	V	Operating supply voltage range
Gate Drive Voltage	Vgs	-	12	-	V	Gate-to-source drive voltage
Maximum Output Current	Iout	-	1.5	2.0	A	Peak output current per channel
Propagation Delay	tpd	30	-	60	ns	Time delay from input to output
Rise Time	tr	10	-	25	ns	Time for output to rise from 10% to 90%
Fall Time	tf	10	-	25	ns	Time for output to fall from 90% to 10%
Input Capacitance	Cin	-	10	-	pF	Capacitance at input pin
Output Capacitance	Cout	-	10	-	pF	Capacitance at output pin
Operating Temperature Range	Toper	-40	-	125	°C	Ambient temperature range
Storage Temperature Range	Tstg	-65	-	150	°C	Temperature range for storage

Instructions for Using the FAN7387:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 20V to avoid damage to the device.

2. Gate Drive Voltage (Vgs):

   • The typical gate drive voltage is 12V. Ensure this voltage is sufficient to fully turn on the MOSFETs being driven.

3. Maximum Output Current (Iout):

   • The peak output current per channel should not exceed 2.0A to prevent overheating and potential damage.

4. Propagation Delay (tpd):

   • The propagation delay is typically between 30ns and 60ns. This delay should be considered in timing-sensitive applications.

5. Rise and Fall Times (tr, tf):

   • The rise and fall times are typically between 10ns and 25ns. These values help in determining the switching speed and can affect the overall efficiency of the circuit.

6. Input and Output Capacitance (Cin, Cout):

   • The input and output capacitances are typically around 10pF. These values can influence the high-frequency performance of the driver.

7. Operating Temperature Range (Toper):

   • The device can operate within an ambient temperature range of -40°C to 125°C. Ensure the operating environment does not exceed these limits.

8. Storage Temperature Range (Tstg):

   • When storing the device, ensure the temperature remains between -65°C and 150°C to maintain the integrity of the component.

9. Mounting and Handling:

   • Handle the device with care to avoid static discharge and physical damage. Follow proper soldering techniques to ensure reliable connections.

10. Circuit Design:

    • Use appropriate decoupling capacitors near the power supply pins to minimize noise and ensure stable operation.
    • Ensure the PCB layout minimizes parasitic inductance and resistance to optimize performance.

By following these parameters and instructions, you can effectively integrate the FAN7387 into your design and achieve optimal performance.

(For reference only)