Details

---

BUY HA1-5104-2 https://www.utsource.net/itm/p/12401450.html

Parameter	Description	Value
Part Number	Full part number	HA1-5104-2
Type	Device type	Relay
Function	Relay function	SPDT
Coil Voltage	Nominal coil voltage	24V DC
Coil Power	Coil power consumption	1.2W
Contact Form	Contact configuration	1 Form C (SPDT)
Contact Rating	Contact current rating	10A at 250V AC
Insulation Resistance	Between contacts and coil	100M惟 min.
Dielectric Strength	Between contacts and coil	1000V AC
Operating Temperature	Operating temperature range	-40掳C to 85掳C
Storage Temperature	Storage temperature range	-40掳C to 125掳C
Mechanical Life	Mechanical life (no load)	10 million cycles
Electrical Life	Electrical life (at rated load)	100,000 cycles
Dimensions	Overall dimensions (L x W x H)	30mm x 17mm x 15mm
Weight	Weight	10g
Mounting	Mounting method	PCB mount
Terminals	Terminal type	Solder lugs

Instructions for Use:

1. Installation:

   • Ensure the relay is mounted on a suitable PCB or panel.
   • Use appropriate soldering techniques to secure the relay terminals.

2. Coil Connection:

   • Connect the coil terminals to the control circuit ensuring the correct polarity.
   • Apply the nominal coil voltage to activate the relay.

3. Contact Connection:

   • Connect the load to the common (COM) terminal.
   • Connect the normally open (NO) and normally closed (NC) terminals as required by the application.

4. Operation:

   • When the coil is energized, the contact will switch from NC to NO.
   • When the coil is de-energized, the contact will return to its default position (NC).

5. Environmental Considerations:

   • Operate the relay within the specified temperature range to ensure reliable performance.
   • Store the relay in a dry environment to prevent damage.

6. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if it fails to operate correctly or shows signs of degradation.

7. Safety:

   • Ensure the relay is not operated beyond its rated specifications to avoid damage or safety hazards.
   • Follow all relevant electrical safety guidelines during installation and operation.

(For reference only)