Details

---

BUY STM32F415OGY6TR https://www.utsource.net/itm/p/12402869.html

Parameter	Description	Value
Device	Device Name	STM32F415OGY6TR
Package	Package Type	LQFP-100 (14x14x1.4 mm)
Operating Voltage	VDD Supply Range	1.8V to 3.6V
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Flash Memory	Flash Memory Size	1MB
SRAM	SRAM Size	192KB
CPU	Core	ARM? Cortex?-M4
CPU Frequency	Maximum CPU Frequency	180 MHz
Clock Sources	Internal High-Speed Clock (HSI)	16 MHz
Clock Sources	External High-Speed Clock (HSE)	4 to 26 MHz
Analog-to-Digital Converters (ADC)	Number of ADCs	3
ADC Resolution	ADC Resolution	12-bit
Digital-to-Analog Converters (DAC)	Number of DACs	2
DAC Resolution	DAC Resolution	12-bit
Timers	General-Purpose Timers	14
Timers	Advanced-Control Timers	2
Timers	Basic Timers	2
Communication Interfaces	UART/USART	8
Communication Interfaces	I2C	3
Communication Interfaces	SPI	6
Communication Interfaces	CAN	2
Communication Interfaces	USB OTG FS	1
Communication Interfaces	Ethernet MAC	1
GPIO Pins	Number of GPIO Pins	84
DMA Channels	Number of DMA Channels	16
Interrupt Lines	Number of Interrupt Lines	84
Power Management	Low Power Modes	Sleep, Stop, Standby
Watchdog Timers	Independent Watchdog Timer	1
Watchdog Timers	Window Watchdog Timer	1
CRC Calculation Unit	CRC Calculation Unit	Yes
RNG	Random Number Generator	Yes
Security	Hardware Firewall	Yes
Security	Tamper Detection	Yes
Security	Readout Protection	Yes

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.8V to 3.6V.
   • Connect the power supply to the VDD and GND pins.

2. Clock Configuration:

   • Use the internal high-speed clock (HSI) for initial configuration.
   • Optionally, connect an external high-speed crystal (HSE) for more precise timing.

3. Reset:

   • The NRST pin can be used to reset the device. Pull it low to reset.

4. Programming:

   • Use a programming tool compatible with the SWD or JTAG interface to program the flash memory.
   • Ensure the correct bootloader settings are configured if using a bootloader.

5. GPIO Configuration:

   • Configure the GPIO pins as input, output, or alternate functions as needed.
   • Refer to the datasheet for specific pin configurations and modes.

6. Peripheral Initialization:

   • Initialize the required peripherals (e.g., UART, I2C, SPI) using the appropriate registers or library functions.
   • Configure the necessary clocks for the peripherals.

7. Low Power Modes:

   • Enter low power modes (Sleep, Stop, Standby) by configuring the power control registers.
   • Ensure proper wake-up sources are set up before entering these modes.

8. Security Features:

   • Enable readout protection and tamper detection as needed.
   • Configure the hardware firewall to protect sensitive data.

9. Debugging:

   • Use the SWD or JTAG interface for debugging purposes.
   • Connect a debugger and use a development environment like STM32CubeIDE for code development and debugging.

10. Documentation:

    • Refer to the STM32F415OGY6TR datasheet and reference manual for detailed information on all parameters and functionalities.
    • Consult the STM32CubeMX tool for easy configuration and initialization of the microcontroller.

For more detailed information, refer to the official STM32F415OGY6TR datasheet and reference manual available from STMicroelectronics.

(For reference only)