Details

---

BUY ADM207EARZ https://www.utsource.net/itm/p/12402969.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	3.0	-	5.5	V
Supply Current	ICC	Quiescent (No Load)	-	1.0	-	mA
Output Current	IOUT	Continuous	-	200	-	mA
Output Voltage	VOUT	No Load	1.25	-	1.25	V
Dropout Voltage	VDROP	IOUT = 100mA	-	0.5	-	V
Thermal Shutdown	TSD	-	-	160	-	°C
Operating Temperature	TA	-	-40	-	85	°C
Storage Temperature	TSTG	-	-65	-	150	°C

Instructions for Using ADM207EARZ

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 3.0V to 5.5V.
   • Use appropriate voltage regulation to maintain stability.

2. Supply Current (I_CC):

   • The quiescent current is typically 1.0mA with no load. This value can help in power budgeting.

3. Output Current (I_OUT):

   • The device can provide up to 200mA continuously. Ensure that the load does not exceed this limit to avoid damage.

4. Output Voltage (V_OUT):

   • The output voltage is fixed at 1.25V under no load conditions. Verify that this meets your application requirements.

5. Dropout Voltage (V_DROP):

   • The dropout voltage is typically 0.5V at 100mA. Ensure that the input voltage is at least 0.5V higher than the desired output voltage to maintain regulation.

6. Thermal Shutdown (T_SD):

   • The device will shut down if the temperature exceeds 160°C to prevent damage. Ensure proper heat dissipation and cooling.

7. Operating Temperature (T_A):

   • The operating temperature range is from -40°C to 85°C. Ensure that the ambient temperature stays within this range.

8. Storage Temperature (T_STG):

   • The storage temperature range is from -65°C to 150°C. Store the device in a suitable environment to avoid damage.

9. Mounting and Handling:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow recommended soldering profiles and mounting guidelines to ensure reliable operation.

10. Circuit Design:

    • Use appropriate decoupling capacitors close to the power pins to filter out noise and ensure stable operation.
    • Consider adding overvoltage and reverse polarity protection if necessary.

11. Testing and Validation:

    • Test the device under various operating conditions to ensure it meets performance specifications.
    • Validate the design with a prototype before mass production.

(For reference only)