Details

---

BUY SKM200GB128D https://www.utsource.net/itm/p/12402999.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Collector-Emitter Voltage	Vceo	-	-	1200	V
Collector-Base Voltage	Vcbo	-	-	1200	V
Emitter-Base Voltage	Vebo	-	-	7	V
Continuous Collector Current	Ic	-	-	200	A	Tc = 25°C
Continuous Collector Current	Ic	-	-	150	A	Tc = 100°C
Pulse Collector Current	Icm	-	-	300	A	tp = 10 ms, Icav = 200 A
Power Dissipation	Ptot	-	-	1500	W	Tc = 25°C
Power Dissipation	Ptot	-	-	1200	W	Tc = 100°C
Junction Temperature	Tj	-	-	150	°C
Storage Temperature Range	Tstg	-40	-	150	°C
Gate Charge	Qg	-	55	-	nC	Vge = 15 V, Ic = 100 A
Total Gate-Charge	Qgt	-	130	-	nC	Vge = 15 V, Ic = 100 A
Turn-on Delay Time	tdon	-	0.6	-	μs	Vge = 15 V, Ic = 100 A
Rise Time	tr	-	0.5	-	μs	Vge = 15 V, Ic = 100 A
Turn-off Delay Time	tdoff	-	0.7	-	μs	Vge = -15 V, Ic = 100 A
Fall Time	tf	-	0.4	-	μs	Vge = -15 V, Ic = 100 A

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage thermal resistance.
   • Handle with care to avoid damage to the leads and body.

2. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure the junction temperature (Tj) does not exceed 150°C.
   • Use appropriate gate drive circuits to ensure reliable switching.

3. Storage:

   • Store in a dry, cool place within the specified storage temperature range (-40°C to 150°C).
   • Avoid exposure to high humidity and corrosive environments.

4. Testing:

   • Perform initial testing at room temperature to verify functionality.
   • Gradually increase load and environmental conditions to ensure stability under operational parameters.

5. Safety:

   • Use protective equipment when handling high-voltage components.
   • Follow all relevant safety guidelines and regulations.

6. Soldering:

   • Preheat the device to reduce thermal shock.
   • Use a soldering iron with a controlled temperature and apply solder quickly to minimize heat exposure.

7. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections, correct polarity, and any damage to the leads or body.
   • Refer to the datasheet for more detailed troubleshooting steps and contact the manufacturer for further assistance.

(For reference only)