Details

---

BUY XC95144XL-7TQ144C https://www.utsource.net/itm/p/12403158.html

Parameter	Description	Value
Device Type	High-Density, Low-Cost CPLD	XC95144XL
Package	TQFP (Thin Quad Flat Package)	144-Pin
Speed Grade	Maximum Operating Frequency	-7 (166 MHz)
Supply Voltage (Vcc)	Operating Voltage Range	3.3V ± 10%
I/O Banks	Number of I/O Banks	8
I/O Pins	Total Number of I/O Pins	112
Macrocells	Number of Macrocells	144
User Flash Memory	User Flash Memory Size	2K bits
Configuration Modes	In-System Programmable (ISP), Boundary-Scan (JTAG)	Supported
Operating Temperature	Commercial Temperature Range	0°C to +70°C
Storage Temperature	Storage Temperature Range	-65°C to +150°C
ESD Protection	Human Body Model (HBM)	2000V
Lead-Free	RoHS Compliance	Yes

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 3.3V ± 10%.
   • Connect Vcc to all Vcc pins and GND to all GND pins as specified in the pinout diagram.

2. Configuration:

   • Use the JTAG interface for in-system programming and boundary-scan testing.
   • For initial configuration, use the ISP mode with a suitable programmer and software tool.

3. I/O Handling:

   • Ensure that all I/O pins are properly terminated to avoid floating inputs.
   • Use appropriate pull-up or pull-down resistors if necessary.

4. Temperature Considerations:

   • Operate the device within the commercial temperature range of 0°C to +70°C.
   • Store the device in a controlled environment within the storage temperature range of -65°C to +150°C.

5. ESD Precautions:

   • Handle the device with ESD precautions to prevent damage from static electricity.
   • Use grounded wrist straps and ESD-safe workstations.

6. Pinout Diagram:

   • Refer to the detailed pinout diagram provided in the datasheet for correct pin connections.

7. Documentation:

   • Always refer to the latest datasheet and application notes for detailed information and specific guidelines.

(For reference only)