Details

---

BUY ST62T25CM6 https://www.utsource.net/itm/p/12403656.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.0		5.5	V
Supply Current	IDD			1.0		mA
Output Voltage	VOH	VDD = 5V, IOH = -4mA	4.2			V
	VOL	VDD = 5V, IOL = 4mA			0.4	V
Output Current (Sink)	IOL	VOL = 0.4V		8		mA
Output Current (Source)	IOH	VOH = 4.2V		-8		mA
Propagation Delay Time	tPD	VDD = 5V		10		ns
Power Dissipation	PD			60		mW

Instructions for ST62T25CM6

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.0V to 5.5V.
   • The device operates optimally with a supply current (IDD) of approximately 1.0mA.

2. Output Configuration:

   • For optimal performance, configure the output voltage (VOH) to be at least 4.2V when sinking 4mA at VDD = 5V.
   • Ensure the output voltage (VOL) does not exceed 0.4V when sourcing 4mA at VDD = 5V.

3. Current Handling:

   • The device can sink up to 8mA and source up to -8mA without exceeding the specified output voltages.

4. Timing Considerations:

   • The propagation delay time (tPD) should be considered as 10ns under typical operating conditions (VDD = 5V).

5. Power Management:

   • Keep the power dissipation (PD) within 60mW to ensure reliable operation and avoid overheating.

6. Handling and Storage:

   • Follow standard handling procedures for electrostatic sensitive devices.
   • Store in a dry environment away from direct sunlight and excessive heat.

7. Applications:

   • Suitable for use in logic level translation, bus interface circuits, and general-purpose digital signal switching applications.

(For reference only)