Details

---

BUY MC33030PG https://www.utsource.net/itm/p/12404290.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5		26	V	Operating input voltage range
Output Voltage	VOUT		5		V	Regulated output voltage
Quiescent Current	IQ		1.5		mA	Supply current in regulation
Dropout Voltage	VDROPOUT		1.2		V	Voltage difference between VIN and VOUT
Load Regulation			0.5		%	Change in output voltage due to load change
Line Regulation			0.1		%	Change in output voltage due to line change
Ripple Rejection			70		dB	Attenuation of input ripple at the output
Thermal Shutdown Temp	TSD		160		掳C	Temperature at which device shuts down
Storage Temperature Range		-65		150	掳C	Temperature range for storage
Operating Junction Temp	TJ	-40		125	掳C	Junction temperature range for operation

Instructions for MC33030PG:

1. Power Supply Connection: Ensure the input voltage (VIN) is within the specified range of 4.5V to 26V. Connect a capacitor (typically 0.1渭F) close to the input pin for stability.
2. Output Configuration: The output voltage is fixed at 5V. Use appropriate capacitors on the output to ensure stability, typically a 1渭F ceramic capacitor.
3. Thermal Considerations: Monitor the junction temperature to not exceed 125掳C during operation. Ensure adequate heat sinking if operating near maximum load conditions.
4. Protection Features: The device includes thermal shutdown and current limiting features. Verify that these do not activate under normal operating conditions.
5. PCB Layout: Place the device away from heat sources and ensure good ventilation or cooling mechanisms are in place. Keep power and ground traces as short as possible to minimize noise.
6. Testing: After assembly, test the regulator with a typical load to ensure it provides a stable 5V output and check for any overheating issues.

This table and set of instructions provide a comprehensive overview for using the MC33030PG effectively in your designs.

(For reference only)