Details

---

BUY KBPC1510 https://www.utsource.net/itm/p/12404303.html

Parameter	Description	Value
Part Number	Component Identifier	KBPC1510
Type	Rectifier Type	Bridge Rectifier
Maximum DC Output Current (Io)	Continuous DC Output Current	10A
Maximum Reverse Voltage (Vr)	Peak Inverse Voltage (PIV)	1500V
Forward Voltage Drop (Vf)	Typical at Rated Current	1.1V
Maximum Junction Temperature (Tj)	Operating Temperature Range	-65°C to +150°C
Package Type	Physical Package	Plastic Case
Mounting Type	Installation Method	Through-Hole
Dimensions	Size (L x W x H)	27mm x 27mm x 10mm

Instructions for Use:

1. Installation:

   • Ensure that the rectifier is mounted on a heatsink if operating near its maximum current rating to prevent overheating.
   • Use appropriate insulation to avoid short circuits and ensure proper electrical isolation.

2. Wiring:

   • Connect the AC input to the two diagonal terminals marked with "~" or "AC".
   • Connect the positive output to the terminal marked with "+".
   • Connect the negative output to the terminal marked with "-".

3. Operating Conditions:

   • Do not exceed the maximum reverse voltage (1500V) to prevent breakdown.
   • Ensure that the operating temperature remains within the specified range (-65°C to +150°C).

4. Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid physical damage to the component.

5. Testing:

   • Before installation, test the rectifier using a multimeter to ensure it is functioning correctly.
   • Measure the forward voltage drop (Vf) under load conditions to verify performance.

6. Safety:

   • Always disconnect power before handling the rectifier to avoid electric shock.
   • Follow all relevant safety guidelines and regulations when working with high voltages.

(For reference only)