Details

---

BUY MC34151 https://www.utsource.net/itm/p/12420146.html

Below is the parameter table and instructions for the MC34151, a high-side power switch from ON Semiconductor.

MC34151 Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	4.5	-	60	V	-
Load Current	IL	-	2.5	3.0	A	Continuous operation
Peak Load Current	IL(peak)	-	-	4.0	A	1 ms pulse, duty cycle < 1%
Thermal Shutdown Temperature	TSD	-	160	-	°C	-
Under-Voltage Lockout	VUVLO	4.0	-	4.5	V	-
Over-Voltage Lockout	VOVO	60	-	65	V	-
Input Leakage Current	IIN	-	1.0	5.0	μA	VIN = 12V, VCC = 12V
Output Leakage Current	ILEAK	-	100	200	μA	VCC = 12V, VOUT = 0V
Power Dissipation	PD	-	-	18.5	W	Ta = 25°C, θJA = 65°C/W
Junction Temperature	TJ	-	-	150	°C	-

Instructions for Using the MC34151

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 4.5V to 60V.
   • The device will not operate below 4.5V due to under-voltage lockout (UVLO).

2. Load Current (I_L):

   • The device can handle continuous load currents up to 3.0A.
   • For short pulses, the peak load current can go up to 4.0A, but ensure the duty cycle is less than 1%.

3. Thermal Protection:

   • The device has built-in thermal shutdown protection that activates at approximately 160°C.
   • Ensure proper heat sinking to prevent the junction temperature from exceeding 150°C.

4. Over-Voltage and Under-Voltage Lockout:

   • The device will shut down if the supply voltage exceeds 65V (over-voltage lockout, OVO).
   • It will also shut down if the supply voltage drops below 4.5V (under-voltage lockout, UVLO).

5. Input and Output Leakage Current:

   • The input leakage current should be kept below 5.0μA to avoid unnecessary power loss.
   • The output leakage current should be monitored and kept below 200μA when the output is off.

6. Power Dissipation:

   • The maximum power dissipation is 18.5W at 25°C ambient temperature with a thermal resistance (θ_JA) of 65°C/W.
   • Use appropriate heat sinks or cooling methods to manage power dissipation and maintain safe operating temperatures.

7. Junction Temperature:

   • The maximum junction temperature is 150°C.
   • Monitor the temperature to ensure it does not exceed this limit to prevent damage to the device.

8. Application Notes:

   • Always refer to the datasheet for detailed application notes and circuit diagrams.
   • Ensure all connections are secure and follow good PCB layout practices to minimize noise and interference.

By following these parameters and instructions, you can effectively use the MC34151 in your high-side power switch applications.

(For reference only)