Details

---

BUY LM309K https://www.utsource.net/itm/p/12426186.html

Parameter	Symbol	Min	Typical	Max	Unit
Output Voltage	Vout	-	1.24	-	V
Line Regulation		-	0.01%	-	%
Load Regulation		-	0.1%	-	%
Dropout Voltage	Vdo	-	0.8	-	V
Quiescent Current	IQ	-	5	-	渭A
Operating Temperature	Temp	-40	-	125	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Using LM309K:

1. Circuit Configuration:

   • Connect the input voltage (Vin) to the IN pin.
   • Connect the output voltage (Vout) to the OUT pin.
   • Ground the GND pin.

2. Capacitor Requirements:

   • Place a 1渭F capacitor between the IN and GND pins to stabilize the input voltage.
   • Place a 1渭F capacitor between the OUT and GND pins to stabilize the output voltage.

3. Heat Dissipation:

   • Ensure adequate heat dissipation if the device is operating at high power levels. Consider using a heatsink if necessary.

4. Input Voltage Range:

   • The input voltage should be at least 0.8V higher than the desired output voltage to ensure proper operation.

5. Output Voltage Adjustment:

   • The LM309K provides a fixed output voltage of 1.24V. For different output voltages, consider using adjustable regulators or external resistors.

6. Operating Conditions:

   • Ensure that the operating temperature is within the specified range (-40掳C to 125掳C).
   • Store the device in an environment where the temperature does not exceed the storage temperature range (-65掳C to 150掳C).

7. Handling Precautions:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Follow standard soldering practices to prevent thermal stress during assembly.

8. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure stable performance and compliance with specifications.

(For reference only)