Details

---

BUY QPF4550SR https://www.utsource.net/itm/p/12426381.html

Below is the parameter table and instructions for the QPF4550SR, a high-efficiency power amplifier module.

QPF4550SR Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Frequency Range		2496		2690	MHz
Output Power (Pout)			31.5		dBm
Power Added Efficiency (PAE)			48%		%
Supply Voltage (Vcc)		2.7	3.0	3.6	V
Operating Temperature		-40		85	°C
Input Return Loss		-15			dB
Output Return Loss		-15			dB
Current Consumption (Icc)			200		mA
Package Size		3.0		3.0	mm x 3.0 mm
Height		0.75		0.75	mm

Instructions for QPF4550SR

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
   • Use a clean and stable power source to avoid voltage fluctuations that could affect performance.

2. Biasing:

   • The QPF4550SR is designed to operate with a single positive supply voltage. No external biasing components are required.

3. Input and Output Matching:

   • The input and output impedances are matched to 50 ohms. No additional matching networks are typically required.
   • Ensure the input and output lines are properly terminated to avoid reflections and signal degradation.

4. Thermal Management:

   • The module is designed to handle the heat generated during operation. However, ensure adequate thermal management by mounting it on a suitable heatsink or PCB with good thermal conductivity.
   • Avoid operating the module at temperatures exceeding 85°C to prevent damage.

5. RF Connections:

   • Use low-loss RF cables and connectors to minimize signal loss.
   • Keep the RF traces as short as possible to reduce parasitic effects.

6. ESD Protection:

   • The QPF4550SR is sensitive to electrostatic discharge (ESD). Handle the module with care and use ESD protection measures such as wrist straps and grounded work surfaces.

7. Testing:

   • Before connecting the module to your system, verify the power supply and RF connections.
   • Use a spectrum analyzer or power meter to measure the output power and ensure it meets the expected specifications.

8. Storage:

   • Store the module in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the module in its original packaging until ready for use to protect against ESD and physical damage.

By following these instructions, you can ensure optimal performance and reliability of the QPF4550SR in your application.

(For reference only)