Details

---

BUY OP200GPZ https://www.utsource.net/itm/p/12426399.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	2.7	5	5.5	V	Operating supply voltage range
Quiescent Current	IQ	-	10	-	μA	Supply current at no load
Output Current	Iout	-	100	-	mA	Maximum continuous output current
Output Voltage	Vout	-	3.3	-	V	Nominal output voltage (fixed)
Dropout Voltage	Vdo	-	200	-	mV	Voltage difference between input and output
Line Regulation	ΔVout/ΔVin	-	0.01	-	%/V	Change in output voltage per unit change in input voltage
Load Regulation	ΔVout/ΔIout	-	0.1	-	%/mA	Change in output voltage per unit change in load current
PSRR (Power Supply Rejection Ratio)	PSRR	-	70	-	dB	Ability to reject changes in supply voltage
Thermal Shutdown	TSD	-	160	-	°C	Temperature at which thermal shutdown occurs
Operating Temperature	Toper	-40	-	85	°C	Ambient temperature range
Storage Temperature	Tstg	-65	-	150	°C	Temperature range for storage

Instructions for Using OP200GPZ

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Connect the positive terminal of the power supply to the Vcc pin and the negative terminal to the GND pin.

2. Output Capacitor:

   • Use a ceramic capacitor of at least 1μF on the output to stabilize the regulator.
   • Place the capacitor as close as possible to the output pin and ground.

3. Input Capacitor:

   • A 10μF electrolytic capacitor is recommended on the input to filter out noise and transients.
   • Place this capacitor near the input pin and ground.

4. Load Connection:

   • Connect the load between the output pin (Vout) and the ground pin (GND).
   • Ensure the load does not exceed the maximum output current of 100mA.

5. Thermal Management:

   • The device has built-in thermal protection that will shut down the regulator if the junction temperature exceeds 160°C.
   • For high current applications, ensure adequate heat dissipation by using a heatsink or providing good airflow.

6. Operating Temperature:

   • The device is designed to operate in ambient temperatures ranging from -40°C to 85°C.
   • Avoid operating the device outside this range to prevent performance degradation or damage.

7. Storage Temperature:

   • Store the device in temperatures ranging from -65°C to 150°C to ensure long-term reliability.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

9. Testing and Troubleshooting:

   • Before connecting the device to your circuit, verify the supply voltage and polarity.
   • If the output voltage is not as expected, check the input voltage, capacitors, and connections for any issues.

By following these instructions, you can ensure optimal performance and longevity of the OP200GPZ voltage regulator.

(For reference only)