Details

---

BUY MMBD1205 https://www.utsource.net/itm/p/12426895.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	45	V
Emitter-Collector Voltage	VEBO	-	-	5	V
Collector-Base Voltage	VCBO	-	-	60	V
Continuous Collector Current	IC	-	100	200	mA
Peak Collector Current	IC(peak)	-	300	-	mA
Base-Emitter Voltage (at IC = 10mA)	VBE	0.7	0.9	1.2	V
DC Current Gain (at IC = 10mA)	hFE	100	300	500	-
Transition Frequency	fT	-	300	500	MHz
Storage Temperature Range	TSTG	-55	-	150	°C
Operating Junction Temperature	TJ	-55	-	150	°C

Instructions for Use:

1. Mounting and Handling:

   • Handle the MMBD1205 with care to avoid mechanical stress and damage.
   • Ensure proper grounding and static protection during handling.

2. Soldering:

   • Use a temperature-controlled soldering iron set to a maximum of 300°C.
   • Soldering time should not exceed 10 seconds per terminal.
   • Allow the device to cool down before testing or further assembly.

3. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly.
   • Ensure that the maximum ratings are not exceeded to prevent damage to the device.

4. Thermal Management:

   • Provide adequate heat dissipation if the device is expected to operate at high currents or temperatures.
   • Consider using a heatsink if necessary.

5. Storage:

   • Store the MMBD1205 in a dry, cool place away from direct sunlight and corrosive environments.
   • Follow the recommended storage temperature range to ensure long-term reliability.

6. Testing:

   • Before final assembly, test the device to ensure it meets the specified electrical parameters.
   • Use appropriate test equipment and methods to avoid damaging the device.

7. Environmental Considerations:

   • The MMBD1205 is designed to meet RoHS standards and is free from hazardous substances.
   • Dispose of the device in accordance with local environmental regulations.

(For reference only)