Details

---

BUY TLP350 https://www.utsource.net/itm/p/12426912.html

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Input Forward Voltage	VIF	-	1.2	1.8	V	IF = 10 mA
Input Current	IF	-	-	30	mA	VIF = 5 V
Output Collector-Emitter Saturation Voltage	VCE(sat)	-	0.3	0.5	V	IC = 100 mA, VCE = 5 V
Output Collector Current	IC	-	-	150	mA	VCE = 5 V
Isolation Voltage	VI	-	-	5000	Vrms	1 minute, 50/60 Hz
Operating Temperature	TA	-40	-	105	掳C	-
Storage Temperature	TSTG	-40	-	125	掳C	-

Instructions for Using TLP350:

1. Input Connection:

   • Connect the input side (anode and cathode) to the control circuit.
   • Ensure the input current (I_F) is within the specified range to avoid damage.

2. Output Connection:

   • Connect the output side (collector and emitter) to the load or the circuit being controlled.
   • Ensure the output collector current (I_C) does not exceed the maximum rating.

3. Isolation:

   • The TLP350 provides electrical isolation between the input and output sides. Ensure the isolation voltage (V_I) is not exceeded to maintain safety and functionality.

4. Temperature Considerations:

   • Operate the device within the specified operating temperature range (T_A) to ensure reliable performance.
   • Store the device within the storage temperature range (T_STG) to prevent damage.

5. Handling Precautions:

   • Handle the TLP350 with care to avoid mechanical stress or damage.
   • Use appropriate static protection measures to prevent electrostatic discharge (ESD) damage.

6. Mounting:

   • Mount the device on a suitable heat sink if necessary to manage heat dissipation, especially under high current conditions.
   • Follow the recommended PCB layout guidelines for optimal performance and reliability.

7. Testing:

   • Before final assembly, test the TLP350 to ensure it meets the specified parameters and functions correctly.
   • Use a multimeter or other testing equipment to verify the input and output characteristics.

By following these instructions, you can ensure the TLP350 operates reliably and safely in your application.

(For reference only)