Details

---

BUY IRS21867SPBF https://www.utsource.net/itm/p/12426921.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VCC	10	-	20	V	Operating supply voltage range
High-Side Driver Output Voltage	VOH	-	15	-	V	Output high-level voltage (at IL = 10 mA)
Low-Side Driver Output Voltage	VOL	-	0.9	-	V	Output low-level voltage (at IL = 1 A)
Input High-Level Voltage	VIH	2	-	20	V	Input high-level voltage
Input Low-Level Voltage	VIL	-	0.8	1.5	V	Input low-level voltage
Propagation Delay Time	td	30	50	70	ns	Propagation delay time (typical at VCC = 15 V, IL = 10 mA)
Pulse Width Distortion	tpd	-	20	-	ns	Maximum difference in propagation delay between high-side and low-side drivers
Maximum Operating Junction Temperature	TJ(max)	-	-	150	°C	Maximum operating junction temperature
Storage Temperature Range	TSTG	-40	-	150	°C	Storage temperature range

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 10V to 20V. The device will not function correctly outside this range.

2. High-Side Driver Output Voltage (V_OH):

   • The output high-level voltage should be around 15V when the load current is 10 mA. This ensures proper driving of the high-side MOSFET.

3. Low-Side Driver Output Voltage (V_OL):

   • The output low-level voltage should be around 0.9V when the load current is 1 A. This ensures the low-side MOSFET is properly turned off.

4. Input High-Level Voltage (V_IH):

   • The input high-level voltage should be between 2V and 20V. Inputs below 2V may not be recognized as high.

5. Input Low-Level Voltage (V_IL):

   • The input low-level voltage should be between 0.8V and 1.5V. Inputs above 1.5V may not be recognized as low.

6. Propagation Delay Time (t_d):

   • The typical propagation delay time is 50 ns at a supply voltage of 15V and a load current of 10 mA. This delay can vary between 30 ns and 70 ns.

7. Pulse Width Distortion (t_pd):

   • The maximum pulse width distortion between the high-side and low-side drivers is 20 ns. This ensures that the timing between the two drivers is synchronized.

8. Maximum Operating Junction Temperature (T_J(max)):

   • The device can operate up to a junction temperature of 150°C. Exceeding this temperature can cause damage or malfunction.

9. Storage Temperature Range (T_STG):

   • The device can be stored in temperatures ranging from -40°C to 150°C. Ensure storage conditions do not exceed these limits to avoid damage.

Additional Notes:

• Always ensure proper heat dissipation when operating the device at high currents or temperatures.
• Use appropriate decoupling capacitors close to the power pins to minimize noise and ensure stable operation.
• Refer to the datasheet for detailed application notes and circuit diagrams.

(For reference only)