Details

---

BUY MJH11021 TO-247 ORIGINAL STOCK DOMESTIC https://www.utsource.net/itm/p/12426929.html

Parameter	Value	Unit
Part Number	MJH11021	-
Package Type	TO-247	-
Manufacturer	ORIGINAL STOCK DOMESTIC	-
Type	NPN Power Transistor	-
Collector-Emitter Voltage (Vce)	800	V
Collector Current (Ic)	15	A
Power Dissipation (Ptot)	180	W
Transition Frequency (ft)	3.5	MHz
Storage Temperature	-65 to 150	°C
Operating Temperature	-65 to 150	°C
Mounting Type	Through Hole	-

Instructions for Use:

1. Handling Precautions: Handle with care to avoid damage to the leads and body. Ensure that electrostatic discharge (ESD) precautions are taken when handling the component.
2. Mounting: When mounting, ensure that the heat sink is properly attached to maximize heat dissipation. Tighten the mounting screw securely but do not exceed the recommended torque value to prevent damage.
3. Soldering: Use a soldering temperature of approximately 260°C for no more than 10 seconds per connection. Allow sufficient time for cooling between solder joints.
4. Storage: Store in a dry, cool place away from direct sunlight and sources of heat. Keep in original packaging until ready for use.
5. Inspection: Before installation, inspect the device for any physical damage or defects. Do not use if any damage is detected.
6. Application: This transistor is suitable for high-power switching applications, audio amplifiers, and other circuits requiring high current and voltage capabilities.

(For reference only)