Details

---

BUY INA114BU https://www.utsource.net/itm/p/12442821.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		卤1.25		卤18	V
Input Voltage Range	VI	Referred to inputs	-VCC + 2		+VCC - 2	V
Output Voltage Swing	VO	Load = 10 k惟	-VCC + 3		+VCC - 3	V
Input Offset Voltage	VOS	Initial, TA = 25掳C	-1	0	+1	mV
Input Bias Current	IB	TA = 25掳C	-100	0	+100	nA
Input Offset Current	IOS	TA = 25掳C	-10	0	+10	nA
Common-Mode Rejection Ratio	CMRR	f = 60 Hz	90	100	110	dB
Power Supply Rejection Ratio	PSRR	f = 60 Hz	70	80	90	dB
Gain Bandwidth Product	GBP			1.2		MHz
Slew Rate	SR			0.3		V/渭s

Instructions for Use:

1. Power Supply Connection:

   • Connect the power supply voltage (V_CC) to the appropriate pins of the INA114BU. Ensure that the supply voltage is within the specified range.

2. Input Signal Connection:

   • Connect the input signals to the inverting and non-inverting input terminals. Ensure that the input voltage does not exceed the input voltage range specified relative to the supply voltages.

3. Output Configuration:

   • The output pin should be connected to a load with consideration for the output voltage swing limitations. Ensure that the load resistance allows the output to swing within the specified limits.

4. Biasing and Compensation:

   • For optimal performance, use external components such as resistors and capacitors to bias and compensate the amplifier according to your specific application requirements.

5. Operating Temperature:

   • Ensure that the device operates within the specified temperature range to maintain performance specifications. The typical operating temperature range is from -40掳C to +85掳C.

6. Handling Precautions:

   • Handle the INA114BU with care to avoid electrostatic discharge (ESD) damage. Use proper ESD protection practices when handling or soldering the component.

7. Testing and Calibration:

   • After assembly, test the circuit under various conditions to ensure it meets the desired performance criteria. Adjust any external components if necessary to fine-tune the performance.

For detailed information on specific applications and advanced configurations, refer to the datasheet provided by the manufacturer.

(For reference only)