Details

---

BUY SKM200GB12T4 https://www.utsource.net/itm/p/12442908.html

Parameter	Symbol	Value	Unit	Test Conditions
Rated Voltage	VDRM	1200	V	-
Rated Current	IC	200	A	Tj = 25°C
Continuous Forward Current	IF(AV)	200	A	TC = 80°C
Peak Forward Current	IFSM	600	A	t = 10 μs, Tj = 25°C
Reverse Recovery Time	trr	130	ns	IF = 100 A, dI/dt = 200 A/μs
Junction to Case Thermal Resistance	RθJC	0.17	K/W	-
Junction to Ambient Thermal Resistance	RθJA	0.5	K/W	-
Storage Temperature Range	Tstg	-55 to +150	°C	-
Operating Temperature Range	Top	-40 to +125	°C	-

Instructions for Use:

1. Mounting:

   • Ensure that the mounting surface is flat and clean.
   • Apply a suitable thermal interface material (TIM) to enhance heat dissipation.
   • Tighten the mounting screws to the recommended torque value to avoid mechanical stress.

2. Electrical Connections:

   • Use high-quality, low-inductance connections to minimize voltage spikes.
   • Ensure that all connections are secure and free from corrosion.
   • Avoid exceeding the maximum current ratings to prevent damage to the device.

3. Thermal Management:

   • Provide adequate cooling, such as forced air or liquid cooling, to keep the junction temperature within the operating range.
   • Monitor the temperature of the heatsink and ensure it does not exceed the maximum specified values.

4. Handling:

   • Handle the device with care to avoid physical damage.
   • Use proper ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

5. Storage:

   • Store the device in a dry, cool environment within the specified storage temperature range.
   • Avoid exposure to extreme temperatures or humidity.

6. Testing:

   • Follow the test conditions specified in the parameter table for accurate measurements.
   • Use appropriate test equipment and methods to ensure reliable results.

7. Safety:

   • Always follow safety guidelines when working with high-voltage and high-current circuits.
   • Ensure that the device is properly insulated and isolated to prevent electrical hazards.

(For reference only)