Details

---

BUY ML4824CS2 https://www.utsource.net/itm/p/12443313.html

Parameter	Description	Min	Typ	Max	Unit
Input Voltage (Vcc)	Operating voltage range	2.7	-	5.5	V
Output Current (Iout)	Maximum continuous output current	-	200	-	mA
Quiescent Current (Iq)	Current consumed by the regulator when no load is applied	-	2.5	-	mA
Dropout Voltage (Vdo)	Difference between input and output voltage at maximum load	-	0.3	-	V
Output Voltage (Vout)	Regulated output voltage	-	3.3	-	V
Thermal Shutdown Temperature (Tsd)	Temperature at which the device will shut down to prevent damage	-	150	-	°C
Operating Temperature Range (Topr)	Range of ambient temperatures over which the device can operate	-40	-	85	°C
Storage Temperature Range (Tstg)	Range of temperatures over which the device can be stored without damage	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the input voltage (Vcc) is within the specified range of 2.7V to 5.5V.
   • Use a suitable decoupling capacitor (typically 10μF) close to the input pin to stabilize the power supply.

2. Output Configuration:

   • Connect the load to the output pin (Vout).
   • Place a bypass capacitor (typically 10μF) close to the output pin to filter out any noise and ensure stable regulation.

3. Thermal Management:

   • The device has built-in thermal shutdown protection, but it is recommended to use a heatsink or provide adequate airflow if operating at high output currents or in high ambient temperatures.

4. PCB Layout:

   • Keep the PCB traces from the input and output capacitors to the respective pins as short as possible to minimize inductance and improve stability.
   • Ensure proper grounding and avoid long ground loops to reduce noise and interference.

5. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

6. Storage:

   • Store the device in a dry, cool place within the specified storage temperature range of -65°C to 150°C.

7. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the required specifications.
   • Use a multimeter to verify the output voltage and current.

By following these guidelines, you can ensure reliable and efficient operation of the ML4824CS2 voltage regulator.

(For reference only)