Details

---

BUY GT50J301 https://www.utsource.net/itm/p/12444227.html

Parameter	Description	Value
Part Number	Full Part Number	GT50J301
Type	Type of Component	Transistor
Polarity	Polarity	NPN
Collector-Emitter Voltage (Vce)	Maximum Collector-Emitter Voltage	30 V
Emitter-Base Voltage (Veb)	Maximum Emitter-Base Voltage	5 V
Collector Current (Ic)	Continuous Collector Current	500 mA
Power Dissipation (Ptot)	Total Power Dissipation	300 mW
Operating Temperature Range	Operating Temperature Range	-40掳C to 125掳C
Storage Temperature Range	Storage Temperature Range	-65掳C to 150掳C
Package	Package Type	SOT-23
Lead Finish	Lead Finish	Tin

Instructions for Use:

1. Handling:

   • Handle the GT50J301 with care to avoid damage to the leads and body.
   • Use proper anti-static precautions to prevent electrostatic discharge (ESD) damage.

2. Mounting:

   • Ensure that the soldering temperature does not exceed 260掳C for more than 10 seconds.
   • Allow the component to cool naturally after soldering to avoid thermal shock.

3. Biasing:

   • Apply the base current (Ib) carefully to ensure the transistor operates within its safe operating area (SOA).
   • Use appropriate resistors to limit the base current and prevent excessive power dissipation.

4. Thermal Management:

   • If the transistor is expected to dissipate significant power, consider using a heatsink to maintain the junction temperature within the specified range.
   • Ensure adequate ventilation or cooling if the ambient temperature is high.

5. Testing:

   • Test the component in a controlled environment to verify its performance before integrating it into the final circuit.
   • Use a multimeter or an oscilloscope to check the voltage and current levels.

6. Storage:

   • Store the GT50J301 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the components in their original packaging until ready for use to protect them from moisture and static.

7. Disposal:

   • Dispose of the component in accordance with local environmental regulations.
   • Do not incinerate the component as it may release harmful substances.

(For reference only)