VN340SP

VN340SP

Category: IC Chips

Specifications
SKU
12444357
Details

BUY VN340SP https://www.utsource.net/itm/p/12444357.html

Parameter Description Value
Part Number Full part number VN340SP
Type Component type N-Channel MOSFET
VDS (Max) Drain-to-Source Voltage 30 V
VGS (Max) Gate-to-Source Voltage ±20 V
ID (Max) Continuous Drain Current 10 A
RDS(on) (Max) On-State Resistance at VGS = 10 V 4.5 mΩ
Power Dissipation (Max) Total Power Dissipation 40 W
Operating Temperature Range Junction Temperature -55°C to +175°C
Storage Temperature Range Storage Temperature -65°C to +150°C
Package Package Type TO-220
Mounting Type Mounting Style Through-Hole

Instructions for Use:

  1. Handling Precautions:

    • ESD Sensitivity: The VN340SP is sensitive to electrostatic discharge (ESD). Handle with care and use appropriate ESD protection measures.
    • Heat Sinking: For applications where the device will operate at high power levels, ensure proper heat sinking to maintain the junction temperature within the specified range.
  2. Circuit Design:

    • Gate Drive: Ensure that the gate drive circuit can provide sufficient voltage to fully turn on the MOSFET. The recommended gate voltage is typically 10 V for optimal performance.
    • Source Connection: Connect the source terminal to the ground or the reference potential of the circuit to ensure stable operation.
    • Drain Connection: Ensure that the drain terminal is connected to the load or power supply with minimal inductance to avoid voltage spikes.
  3. Thermal Management:

    • Heatsink Selection: Choose a heatsink that can dissipate the maximum power dissipation of the device under worst-case conditions.
    • Thermal Compound: Apply a thin layer of thermal compound between the device and the heatsink to improve thermal conductivity.
  4. Testing and Verification:

    • Initial Testing: Perform initial testing at low power levels to verify the correct operation of the circuit.
    • Thermal Monitoring: Monitor the temperature of the device during operation to ensure it does not exceed the maximum operating temperature.
  5. Storage and Handling:

    • Storage Conditions: Store the device in a dry, cool place away from direct sunlight and sources of heat.
    • Handling: Use anti-static wrist straps and other ESD protection equipment when handling the device to prevent damage.
  6. Safety Precautions:

    • High Voltage: Be cautious when working with circuits that involve high voltages to avoid electrical shock.
    • Proper Ventilation: Ensure proper ventilation in the workspace to prevent the buildup of harmful fumes or gases.

By following these instructions, you can ensure the reliable and safe operation of the VN340SP N-Channel MOSFET in your application.

(For reference only)

View more about VN340SP on main site