Details

---

BUY NTD2955T4G https://www.utsource.net/itm/p/12444399.html

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Drain-Source Voltage	VDS	-	60	-	V
Gate-Source Voltage	VGS	-15	0	15	V
Continuous Drain Current	ID	-	32	-	A	TC = 25°C
Continuous Drain Current	ID	-	23	-	A	TC = 70°C
Pulse Drain Current	ID(p)	-	80	-	A	tp = 10 ms, TC = 25°C
Total Power Dissipation	PTOT	-	130	-	W	TC = 25°C
Junction Temperature	TJ	-	-	150	°C
Storage Temperature Range	TSTG	-55	-	150	°C

Instructions for NTD2955T4G:

1. Handling Precautions:

   • Handle with care to avoid damage to the leads and body.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure that the mounting surface is clean and free of contaminants.
   • Apply thermal paste or thermal interface material between the device and the heat sink for optimal thermal performance.
   • Secure the device to the heat sink using appropriate fasteners to ensure good thermal contact.

3. Soldering:

   • Use a soldering iron with a temperature setting suitable for the device (typically 260°C or less).
   • Avoid excessive heating time to prevent thermal damage.
   • Allow the device to cool naturally after soldering.

4. Electrical Connections:

   • Connect the drain (D), gate (G), and source (S) terminals according to the circuit diagram.
   • Ensure that the gate-source voltage (V_GS) does not exceed the maximum rating of ±15V.
   • Keep the drain-source voltage (V_DS) within the maximum rating of 60V.

5. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed 150°C.
   • Use a heatsink or cooling solution if necessary to maintain safe operating temperatures.

6. Storage:

   • Store the device in a dry, cool environment within the storage temperature range of -55°C to 150°C.
   • Protect the device from moisture and physical damage during storage.

7. Testing:

   • Perform initial testing at room temperature to verify functionality.
   • Gradually increase the load and monitor performance parameters to ensure stable operation under all conditions.

8. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections, correct voltage levels, and thermal management.
   • Refer to the datasheet for more detailed troubleshooting information.

(For reference only)