Details

---

BUY TL074ACN https://www.utsource.net/itm/p/12444953.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	-18	-15	-12	V
Supply Voltage	VEE	+12	+15	+18	V
Input Offset Voltage	VIO	-15	5	15	渭V
Input Bias Current	IB	-200	80	200	nA
Input Offset Current	IOS	-60	20	60	nA
Input Voltage Range	VI	VEE+2	-	VCC-2	V
Output Voltage Swing	VO	VEE+3	-	VCC-3	V
Slew Rate	SR	-	13	-	V/渭s
Bandwidth (Unity Gain)	fT	-	3.5	-	MHz
Large Signal Voltage Gain	AV	-	200	-	V/mV
Common Mode Rejection Ratio	CMRR	-	80	-	dB
Power Supply Rejection Ratio	PSRR	-	90	-	dB
Quiescent Current	IQ	-	1.7	-	mA

Instructions for Using TL074ACN:

1. Power Supply:

   • Connect the positive supply voltage (V_CC) to pin 4.
   • Connect the negative supply voltage (V_EE) to pin 11.
   • Ensure the supply voltages are within the specified range to avoid damage to the device.

2. Input Signals:

   • Connect the non-inverting input (pin 3 for the first op-amp, pin 10 for the second, etc.) to the positive input signal.
   • Connect the inverting input (pin 2 for the first op-amp, pin 9 for the second, etc.) to the negative input signal or feedback network.
   • Keep the input signals within the input voltage range to prevent distortion or damage.

3. Output Signals:

   • The output pins (pin 1 for the first op-amp, pin 7 for the second, etc.) provide the amplified signal.
   • Ensure the load is connected within the output voltage swing limits to avoid clipping or distortion.

4. Grounding:

   • Connect the ground (GND) to pin 12 to ensure proper operation and stability.

5. Feedback Network:

   • Use appropriate resistors and capacitors in the feedback network to set the gain and frequency response as required by your application.

6. Decoupling Capacitors:

   • Place decoupling capacitors (typically 0.1 渭F and 10 渭F) close to the power supply pins to filter out noise and stabilize the supply voltage.

7. Operating Temperature:

   • Ensure the operating temperature is within the specified range for the device to function correctly.

8. Storage and Handling:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge which can damage the sensitive components.

By following these instructions, you can ensure optimal performance and longevity of the TL074ACN operational amplifier.

(For reference only)