Details

---

BUY TLP2366 https://www.utsource.net/itm/p/12444970.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Current	IF	Continuous	-	10	30	mA
Input Voltage	VI		1.5	3.3	5.5	V
Output Current	IO	Continuous	-	1.5	3.0	A
Peak Output Current	IOP	Pulse Width ≤ 1 ms	-	-	5.0	A
Isolation Voltage	VIORM	1 min, 50/60 Hz	-	-	5000	Vrms
Propagation Delay Time	tpHL	VI = 5V, IO = 1A	-	1.2	1.8	μs
	tpLH	VI = 5V, IO = 1A	-	1.2	1.8	μs
Storage Temperature	Tstg		-40	-	125	°C
Operating Temperature	Topr		-40	-	110	°C

Instructions for Use:

1. Power Supply:

   • Ensure the input voltage (VI) is within the specified range (1.5V to 5.5V).
   • The input current (IF) should be between 10mA and 30mA for reliable operation.

2. Output Handling:

   • The continuous output current (IO) should not exceed 3A.
   • For short pulses (≤ 1 ms), the peak output current (IOP) can go up to 5A.

3. Isolation:

   • The device provides an isolation voltage (VIORM) of 5000Vrms for 1 minute at 50/60 Hz.

4. Timing:

   • The propagation delay time (tpHL and tpLH) is typically 1.2 to 1.8 microseconds when the input voltage is 5V and the output current is 1A.

5. Temperature:

   • Store the device in temperatures ranging from -40°C to 125°C.
   • Operate the device within the temperature range of -40°C to 110°C to ensure optimal performance.

6. Mounting and Handling:

   • Handle with care to avoid mechanical stress on the leads and body.
   • Follow standard surface mount technology (SMT) procedures for mounting on PCBs.

7. Testing:

   • Before final assembly, test the device under the specified conditions to ensure it meets the required performance parameters.

(For reference only)