Details

---

BUY TSB43AB23PDT https://www.utsource.net/itm/p/12445060.html

Parameter	Description	Value	Unit
Device Type	Quad 2-line to 4-line Decoder/Demultiplexer with Active LOW Outputs
Supply Voltage (VCC)	Operating supply voltage	2.0 to 5.5	V
Output Current (IO)	Continuous output current per output	±10	mA
Propagation Delay	Time delay from input change to corresponding output change	6.8	ns
Power Dissipation	Maximum power dissipation	340	mW
Operating Temperature	Ambient temperature range for operation	-40 to +85	°C
Storage Temperature	Temperature range for storage	-65 to +150	°C
Package Type	Plastic small outline package (SOIC)	16-pin

Instructions for TSB43AB23PDT

1. Power Supply Connection: Connect the VCC pin to a power supply within the specified range of 2.0V to 5.5V and GND pin to ground.
2. Input Signal Application: Apply binary input signals to the address inputs A, B, and C. Ensure that these signals are within the logic levels defined by the supply voltage.
3. Output Handling: The device has active LOW outputs. Ensure that external pull-up resistors are used on the output lines if interfacing with devices requiring active HIGH signals.
4. Decoding Operation: The decoder will activate one of the four outputs based on the binary input provided to A, B, and C. Refer to the truth table in the datasheet for specific decoding operations.
5. Thermal Considerations: Monitor the operating temperature to ensure it stays within the -40°C to +85°C range. Avoid exceeding the maximum power dissipation to prevent overheating.
6. Storage Conditions: Store the component in an environment where the temperature does not exceed the -65°C to +150°C range to maintain reliability.
7. Handling Precautions: Handle with care to avoid damage to the pins and package. Follow ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)