Details
BUY MAX690AESA https://www.utsource.net/itm/p/12447329.html
Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage | VCC | Operating range | 2.0 | 2.7 | 5.5 | V |
Quiescent Current | IQ | No load, VCC = 2.7V | - | 100 | - | μA |
Shutdown Current | ISD | VCC = 2.7V | - | 1 | - | μA |
Oscillator Frequency | fOSC | RT = 330kΩ, VCC = 2.7V | 1.0 | 1.2 | 1.4 | MHz |
Output Voltage (High) | VOH | IOL = 0.4mA, VCC = 5.5V | 4.5 | 5.0 | 5.5 | V |
Output Voltage (Low) | VOL | IOH = 0.4mA, VCC = 2.7V | 0.0 | 0.1 | 0.2 | V |
Output Current (Sink) | IOS | VCC = 5.5V | - | 20 | - | mA |
Output Current (Source) | IOSC | VCC = 5.5V | - | 20 | - | mA |
Operating Temperature | TOPR | Commercial | 0 | - | 70 | °C |
Storage Temperature | TSTG | - | -40 | - | 85 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 2.0V to 5.5V.
- The quiescent current (IQ) is typically 100μA at 2.7V.
Shutdown Mode:
- To enter shutdown mode, set the shutdown pin (SHDN) to a low state.
- The shutdown current (ISD) is typically 1μA at 2.7V.
Oscillator Configuration:
- Connect an external resistor (RT) to the oscillator pin to set the frequency.
- For example, using a 330kΩ resistor will result in an oscillator frequency of approximately 1.2MHz at 2.7V.
Output Configuration:
- The output voltage high (VOH) should be at least 4.5V when sourcing 0.4mA and VCC is 5.5V.
- The output voltage low (VOL) should be no more than 0.2V when sinking 0.4mA and VCC is 2.7V.
- The maximum output current (sink or source) is 20mA at 5.5V.
Temperature Considerations:
- The operating temperature range is from 0°C to 70°C for commercial use.
- The storage temperature range is from -40°C to 85°C.
General Handling:
- Handle the device with care to avoid electrostatic discharge (ESD).
- Ensure all connections are secure and meet the specified electrical parameters.
Application Notes:
- Refer to the datasheet for detailed application circuits and examples.
- For optimal performance, follow the recommended PCB layout guidelines provided in the datasheet.
View more about MAX690AESA on main site