Details

---

BUY SKKH57/08E https://www.utsource.net/itm/p/12494461.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 20mA		1.8	2.2	V
Reverse Current	IR	VR = 5V			100	nA
Peak Forward Current	IF(surge)	tp = 1s		30		mA
Operating Temperature	Top		-40		85	°C
Storage Temperature	Tstg		-40		125	°C
Thermal Resistance	RθJA			160		K/W

Instructions for Use:

1. Mounting:

   • Ensure the component is mounted on a flat, clean surface.
   • Use a soldering iron with a temperature not exceeding 300°C.
   • Soldering time should not exceed 5 seconds per joint.

2. Handling:

   • Handle the component with care to avoid mechanical stress.
   • Avoid touching the leads directly; use tweezers or a similar tool.

3. Electrical Connections:

   • Connect the anode (longer lead) to the positive terminal of the power supply.
   • Connect the cathode (shorter lead or marked side) to the negative terminal or ground.

4. Operating Conditions:

   • Do not exceed the maximum forward current (IF) or reverse voltage (VR) ratings.
   • Ensure the operating temperature is within the specified range (-40°C to 85°C).

5. Storage:

   • Store the component in a dry, cool place away from direct sunlight.
   • Keep the component in its original packaging until ready to use.

6. Testing:

   • Use a multimeter to verify the forward voltage (VF) and reverse current (IR) before installation.
   • Test the component under typical operating conditions to ensure it meets the required specifications.

7. Safety:

   • Follow all relevant safety guidelines and regulations when handling and installing the component.
   • Use appropriate personal protective equipment (PPE) as needed.

(For reference only)