Details

---

BUY K75H603 https://www.utsource.net/itm/p/12496607.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	K75H603	-
Type	Component Type	Diode	-
Maximum Reverse Voltage (VR)	Maximum voltage that can be applied in reverse direction without breakdown	600	V
Maximum Forward Current (IF)	Maximum continuous forward current	3	A
Peak Forward Surge Current (IFSM)	Maximum peak forward surge current	30	A
Forward Voltage (VF)	Voltage drop across the diode when conducting in the forward direction (at IF = 1A)	1.1	V
Reverse Recovery Time (trr)	Time it takes for the diode to recover from forward to reverse blocking state	350	ns
Operating Temperature Range (TJ)	Range of temperatures over which the device can operate safely	-55 to +150	掳C
Storage Temperature Range (TSTG)	Range of temperatures over which the device can be stored without damage	-65 to +150	掳C
Package Type	Physical package of the component	TO-220	-
Mounting Type	Method of mounting the component	Through-hole	-

Instructions for Use:

1. Handling:

   • Handle the diode with care to avoid mechanical stress.
   • Avoid touching the leads or body of the diode to prevent static discharge.

2. Mounting:

   • Ensure proper heat sinking if the diode will be operating at high currents.
   • Follow the recommended soldering profile to avoid thermal shock.

3. Electrical Connections:

   • Connect the anode (positive lead) to the higher potential and the cathode (negative lead) to the lower potential.
   • Ensure that the reverse voltage does not exceed 600V to prevent breakdown.

4. Thermal Management:

   • If operating near the maximum forward current, use a heatsink to maintain the junction temperature within the specified range.
   • Monitor the temperature during operation to ensure it remains within the operating temperature range.

5. Storage:

   • Store the diode in a dry, cool place within the storage temperature range.
   • Keep the diode in its original packaging until ready for use to protect against moisture and static damage.

6. Testing:

   • Use a multimeter to test the diode for continuity. The diode should show low resistance in the forward direction and high resistance in the reverse direction.
   • For more detailed testing, refer to the datasheet for specific test conditions and procedures.

7. Safety:

   • Always follow standard safety guidelines when working with electrical components.
   • Use appropriate personal protective equipment (PPE) when handling and testing the diode.

(For reference only)