Details

---

BUY SKD82/16 https://www.utsource.net/itm/p/12496631.html
 

Parameter	Description	Value
Part Number	Full part number	SKD82/16
Type	Type of component	Diode
Package	Package type	DO-204AD
Polarity	Polarity	Unidirectional
Forward Voltage (Vf)	Forward voltage at rated current	0.7 V (max)
Reverse Voltage (Vr)	Maximum reverse voltage	800 V (max)
Average Rectified Current (Io)	Average rectified current	1 A (max)
Peak Reverse Current (Irm)	Peak reverse current	30 A (max)
Power Dissipation (Pd)	Power dissipation	16 W (max)
Operating Temperature (Tj)	Junction operating temperature range	-55°C to +150°C
Storage Temperature (Ts)	Storage temperature range	-65°C to +150°C
Thermal Resistance (Rth)	Thermal resistance (Junction to Ambient)	25°C/W
Capacitance (C)	Capacitance at 1 MHz	15 pF (typical)
Reverse Recovery Time (trr)	Reverse recovery time	350 ns (max)

Instructions for Use:

1. Mounting:

   • Ensure the diode is mounted on a heatsink if operating near the maximum power dissipation.
   • Use appropriate mounting hardware to secure the diode and ensure good thermal contact.

2. Soldering:

   • Preheat the PCB to 100°C to 150°C before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should not exceed 10 seconds.

3. Handling:

   • Handle the diode with care to avoid mechanical stress.
   • Avoid touching the leads or body of the diode with bare hands to prevent contamination.

4. Electrical Connections:

   • Connect the anode to the positive side of the circuit.
   • Connect the cathode to the negative side of the circuit.
   • Ensure that the reverse voltage does not exceed the maximum rating to prevent damage.

5. Testing:

   • Use a multimeter to test the diode for continuity.
   • The diode should show a low resistance in the forward direction and high resistance in the reverse direction.

6. Storage:

   • Store the diode in a dry, cool place away from direct sunlight.
   • Keep the diode in its original packaging until ready for use to protect against static discharge.

7. Compliance:

   • Ensure that the diode complies with all relevant safety and regulatory standards for your application.

(For reference only)