Details

---

BUY AD9460BSVZ-105 https://www.utsource.net/itm/p/12508720.html

Parameter	Description	Min	Typ	Max	Unit
Analog Input Voltage Range	Range of input voltage for analog signals	-1.2		1.2	V
Analog Bandwidth	Frequency range where the signal can pass without significant attenuation		600		MHz
Sampling Rate	Rate at which the ADC samples the input signal		105		MSPS
Resolution	Number of bits used to represent the sampled value		14		bits
SNR (Signal-to-Noise Ratio)	Ratio of signal power to noise power		73		dB
SFDR (Spurious-Free Dynamic Range)	Range over which no spurious signals are present higher than the noise floor		92		dBc
Power Consumption	Total power consumed by the device		450		mW
Differential Input Range	Maximum peak-to-peak differential input voltage		2.0		Vpp

Instructions for AD9460BSVZ-105:

1. Power Supply:

   • Ensure that the power supply voltages meet the specifications in the datasheet.
   • Use decoupling capacitors close to the power pins to reduce noise.

2. Analog Input:

   • Connect the analog input signal within the specified voltage range (-1.2V to +1.2V).
   • For optimal performance, match the analog input impedance with the source impedance.

3. Clock Input:

   • Provide a stable clock signal at the specified sampling rate (105 MSPS).
   • Ensure minimal jitter in the clock signal to maintain high performance.

4. Digital Outputs:

   • The digital outputs should be connected to a compatible logic level system.
   • Use appropriate termination resistors to prevent reflections on the output lines.

5. Reference Voltage:

   • Connect a stable reference voltage to ensure accurate conversion.
   • The reference voltage must be clean and stable to avoid introducing errors.

6. Grounding:

   • Maintain a solid ground plane to minimize noise and improve signal integrity.
   • Separate analog and digital grounds as recommended in the datasheet.

7. Temperature Considerations:

   • Operate the device within the specified temperature range to ensure reliable operation.
   • Implement proper heat dissipation mechanisms if operating in high-temperature environments.

8. Initialization:

   • Follow the initialization sequence provided in the datasheet to configure the device properly before use.

Note: Always refer to the latest datasheet from Analog Devices for detailed specifications and application notes.

(For reference only)