Details

---

BUY HY4008P ORIGINAL GOODS IN STOCK https://www.utsource.net/itm/p/12511181.html

Parameter	Description
Part Number	HY4008P
Manufacturer	Original Manufacturer
Status	In Stock
Type	Voltage Regulator
Configuration	Linear
Output Type	Fixed
Output Voltage	5V
Input Voltage	7V to 24V
Output Current	1A
Package Type	TO-220
Operating Temp.	-40°C to +85°C
Dropout Voltage	1.2V (Max)
Quiescent Current	6mA (Typical)
PSRR	60dB (at 1kHz)
Features	Short-Circuit Protection, Over-Temperature Protection

Instructions for Use:

1. Mounting: Ensure the HY4008P is mounted on a suitable heatsink if operating near maximum output current to maintain optimal temperature.
2. Input Connection: Connect the input voltage between 7V and 24V to the Vin pin. Ensure proper polarity.
3. Output Connection: The Vout pin provides a regulated 5V output. Connect this to your load or circuit requiring stable 5V power.
4. Ground Connection: Both input and output grounds must be connected to the GND pin of the regulator.
5. Capacitors: It is recommended to place a 0.33μF capacitor between Vin and GND, and a 0.1μF capacitor between Vout and GND for stability.
6. Protection: The device includes built-in short-circuit and over-temperature protection. However, avoid prolonged operation under fault conditions.
7. Storage: Store in a dry environment away from direct sunlight and extreme temperatures when not in use.

(For reference only)