Details

---

BUY PIC16C54C-04/P https://www.utsource.net/itm/p/12511191.html

Parameter	Description	PIC16C54C-04/P Specifications
Package Type	The type of packaging used for the component.	PDIP (Plastic Dual Inline Package)
Pin Count	Number of pins on the package.	18 Pins
Operating Voltage (Vdd)	Range of supply voltage for operation.	2.0V to 5.5V
Oscillator Type	Type of oscillator supported.	RC, LP (Low Power Crystal), XT (Crystal), HS (High Speed Crystal)
Program Memory Size	Size of program memory available.	768 x 12-bit words
Data Memory (RAM)	Amount of data memory available.	25 bytes
EEPROM Size	Size of EEPROM memory available.	None
I/O Pins	Number of Input/Output pins available.	12 I/O Pins
Instruction Cycle Time	Time per instruction cycle at maximum frequency.	20 MHz (for 0.2 μs per instruction cycle)
Temperature Range	Operating temperature range.	-40°C to +85°C
Power Consumption	Typical power consumption in active mode.	Varies with frequency and operating conditions; typically low due to CMOS technology
Watchdog Timer (WDT)	Availability of a watchdog timer.	Yes, programmable
Brown-out Reset (BOR)	Feature to reset the microcontroller when voltage drops below a threshold.	Optional, can be enabled/disabled
In-Circuit Serial Programming (ICSP)	Ability to program the device in-circuit.	Supported

Instructions for Use:

1. Power Supply Requirements: Ensure the supply voltage (Vdd) is within the specified range of 2.0V to 5.5V. Connect Vss to ground.

2. Oscillator Configuration: Choose the appropriate oscillator type based on application requirements. Configure the OSC1 and OSC2 pins accordingly.

3. Programming: Use In-Circuit Serial Programming (ICSP) for programming the device. Ensure proper connections to MCLR, PGD, and PGC pins.

4. I/O Pin Configuration: Configure the I/O pins as inputs or outputs using the TRIS register. Set the direction of each pin as required.

5. Watchdog Timer: Enable or disable the watchdog timer through configuration bits. Adjust the timeout period if necessary.

6. Brown-out Reset: If BOR is enabled, the device will reset if the supply voltage falls below the threshold.

7. Operating Temperature: Ensure the operating environment stays within the -40°C to +85°C range to avoid damage or unreliable operation.

8. Power Consumption Management: Optimize power consumption by reducing the operating frequency and using sleep modes where applicable.

9. Handling Static Electricity: Handle the device with care to avoid damage from static electricity. Use appropriate ESD protection measures.

For detailed information, refer to the Microchip datasheet for the PIC16C54C-04/P.

(For reference only)