Details

---

BUY DS92LV1212AMSA https://www.utsource.net/itm/p/12511197.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.7	-	3.6	V	-
Operating Temperature Range	Toper	-40	-	85	°C	-
Storage Temperature Range	Tstg	-65	-	150	°C	-
Input Voltage (High)	VIH	2.0	-	VCC	V	-
Input Voltage (Low)	VIL	0	-	0.8	V	-
Output Voltage (High)	VOH	2.4	-	VCC - 0.1	V	-
Output Voltage (Low)	VOL	0	-	0.4	V	-
Propagation Delay Time	tpd	-	1.5	-	ns	VCC = 3.3V, TA = 25°C
Skew	tskew	-	0.5	-	ns	VCC = 3.3V, TA = 25°C
Power Consumption	ICC	-	10	-	mA	VCC = 3.3V, TA = 25°C

Instructions:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 2.7V to 3.6V.
   • Use appropriate decoupling capacitors (0.1μF and 10μF) close to the power pins to minimize noise.

2. Temperature:

   • The device operates reliably within the temperature range of -40°C to 85°C.
   • Store the device in a temperature range of -65°C to 150°C.

3. Input Signals:

   • Input voltages should be within the specified levels:
     • High (VIH): 2.0V to VCC
     • Low (VIL): 0V to 0.8V

4. Output Signals:

   • Output voltages should meet the following specifications:
     • High (VOH): 2.4V to VCC - 0.1V
     • Low (VOL): 0V to 0.4V

5. Timing:

   • Propagation delay time (tpd) is typically 1.5ns under standard conditions (VCC = 3.3V, TA = 25°C).
   • Skew (tskew) is typically 0.5ns under the same conditions.

6. Power Consumption:

   • The typical current consumption (ICC) is 10mA under standard conditions (VCC = 3.3V, TA = 25°C).

7. Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Follow proper soldering and mounting procedures to ensure reliable operation.

8. Testing:

   • Perform initial testing at room temperature (25°C) and nominal supply voltage (3.3V) to verify functionality.
   • Conduct additional tests over the full operating temperature and voltage ranges as needed.

(For reference only)