Details

---

BUY AD5327BRUZ https://www.utsource.net/itm/p/12524229.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		2.7	5	5.5	V
Output Voltage Range	VOUT	VDD = 5V	0		5	V
Digital Input Voltage	VIN		0		VDD	V
Operating Temperature	Toper		-40		85	°C
Storage Temperature	Tstg		-65		150	°C
Output Current (Source)	IOS	VDD = 5V		10		mA
Output Current (Sink)	IOL	VDD = 5V		10		mA
Power Dissipation	PD	Toper = 25°C		390		mW
Resolution				12		bits
Differential Nonlinearity	DNL		-1	0	+1	LSB
Integral Nonlinearity	INL		-1	0	+1	LSB
Settling Time	tset	0.1% settling		8		μs
Power Consumption	IDD	All channels off		1.2		mA
Shutdown Current	ISD			1		μA

Instructions for Using AD5327BRUZ

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Digital Inputs:

   • Apply digital input signals (VIN) within the range of 0V to VDD.
   • Use a logic level compatible with the supply voltage.

3. Output Configuration:

   • The output voltage (VOUT) can be set from 0V to VDD.
   • Ensure the load connected to the output does not exceed the maximum output current (10mA source or sink).

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device within the temperature range of -65°C to 150°C.

5. Power Dissipation:

   • Keep the power dissipation below 390mW to avoid overheating, especially at higher operating temperatures.

6. Resolution and Linearity:

   • The device has a 12-bit resolution.
   • Ensure that the differential nonlinearity (DNL) and integral nonlinearity (INL) are within ±1 LSB for accurate output.

7. Settling Time:

   • Allow for a settling time of 8μs for the output to stabilize to within 0.1% of the final value after a change in the digital input.

8. Power Consumption:

   • The typical power consumption is 1.2mA when all channels are off.
   • In shutdown mode, the current consumption is reduced to 1μA.

9. Programming:

   • Use the serial interface (SPI or I2C, depending on the variant) to program the DAC.
   • Refer to the datasheet for specific command codes and programming sequences.

10. Handling and Storage:

    • Handle the device with care to avoid electrostatic discharge (ESD).
    • Store the device in a dry, cool environment to prevent damage.

For more detailed information, refer to the AD5327BRUZ datasheet provided by Analog Devices.

(For reference only)