Details

---

BUY TLP293-4(GB-TP,E(T https://www.utsource.net/itm/p/12526291.html

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Forward Voltage (VF)	VF	-	1.2	1.6	V	IF = 10 mA, TA = 25°C
Forward Current (IF)	IF	-	-	50	mA	Continuous, TA = 25°C
Peak Forward Current (IF(surge))	IF(surge)	-	-	150	mA	tp = 1 ms, TA = 25°C
Reverse Voltage (VR)	VR	-	-	5	V	TA = 25°C
Reverse Current (IR)	IR	-	0.1	1	μA	VR = 5 V, TA = 25°C
Output Current (IC)	IC	-	-	150	mA	TA = 25°C
Collector-Emitter Saturation Voltage (VCE(sat))	VCE(sat)	-	0.3	0.5	V	IC = 150 mA, IF = 5 mA, TA = 25°C
Turn-On Time (ton)	ton	-	0.2	1	μs	IF = 5 mA, IC = 150 mA, RL = 1 kΩ, CL = 100 pF, TA = 25°C
Turn-Off Time (toff)	toff	-	0.2	1	μs	IF = 5 mA, IC = 150 mA, RL = 1 kΩ, CL = 100 pF, TA = 25°C
Storage Temperature (TSTG)	TSTG	-40	-	110	°C	-
Operating Temperature (TA)	TA	-40	-	105	°C	-

Instructions for Use:

1. Mounting and Handling:

   • Handle the TLP293-4 with care to avoid mechanical stress.
   • Ensure proper mounting to prevent thermal issues.

2. Electrical Connections:

   • Connect the anode (A) to the positive supply.
   • Connect the cathode (K) to the input signal source.
   • Connect the collector (C) to the load.
   • Connect the emitter (E) to the ground or reference point.

3. Power Supply:

   • Ensure the forward current (I_F) does not exceed 50 mA continuously.
   • For peak conditions, do not exceed 150 mA for more than 1 ms.

4. Signal Input:

   • Apply the input signal to the anode-cathode terminals.
   • The forward voltage (V_F) should be within the specified range to ensure proper operation.

5. Output Load:

   • The output current (I_C) should not exceed 150 mA.
   • Ensure the load resistance is appropriate to limit the current within safe limits.

6. Thermal Management:

   • Operate the device within the specified temperature range to avoid damage.
   • Use heat sinks if necessary to manage heat dissipation.

7. Testing and Troubleshooting:

   • Test the device under typical operating conditions to verify performance.
   • Check for proper connections and correct polarity to avoid damage.

8. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.

(For reference only)