Details

---

BUY PEF22554E-V2.1 https://www.utsource.net/itm/p/12527257.html

Parameter	Description	Min	Typ	Max	Unit
Input Voltage (VIN)	Operating input voltage range	4.5	-	5.5	V
Output Voltage (VOUT)	Regulated output voltage	-	3.3	-	V
Output Current (IOUT)	Maximum continuous output current	-	1.5	2.0	A
Quiescent Current (IQ)	Quiescent current at no load	50	-	100	μA
Dropout Voltage (VDROP)	Dropout voltage at maximum load	200	-	300	mV
Load Regulation	Change in output voltage with load	-	1.0	-	%
Line Regulation	Change in output voltage with input voltage	-	0.5	-	%
Ripple Rejection	Ability to reject input ripple	60	-	80	dB
Operating Temperature (TJ)	Junction temperature range	-40	-	125	°C
Storage Temperature (TS)	Storage temperature range	-65	-	150	°C

Instructions for Using PEF22554E-V2.1

1. Input Connection:

   • Connect the input voltage (VIN) to the input pin of the PEF22554E-V2.1. Ensure the input voltage is within the specified range of 4.5V to 5.5V.

2. Output Connection:

   • Connect the output pin to the load. The regulated output voltage will be 3.3V. Ensure the load current does not exceed the maximum continuous output current of 2.0A.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of the system to ensure proper operation.

4. Capacitors:

   • Place a 10μF ceramic capacitor close to the input pin to filter out noise and stabilize the input voltage.
   • Place a 10μF ceramic capacitor close to the output pin to stabilize the output voltage and reduce ripple.

5. Thermal Considerations:

   • Ensure adequate heat dissipation by mounting the PEF22554E-V2.1 on a heatsink or PCB with good thermal conductivity if operating at high currents or in high ambient temperatures.

6. Operating Temperature:

   • The device is designed to operate within a junction temperature range of -40°C to 125°C. Avoid operating in environments outside this range to prevent damage.

7. Storage Temperature:

   • Store the device in a dry environment with temperatures between -65°C and 150°C to ensure long-term reliability.

8. Testing:

   • Before finalizing the design, test the device under various load conditions to ensure it meets the performance specifications and operates reliably.

9. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components. Use appropriate ESD protection measures.

By following these instructions, you can ensure optimal performance and reliability of the PEF22554E-V2.1 in your application.

(For reference only)