Details

---

BUY LTC1286CS8#PBF https://www.utsource.net/itm/p/12529252.html

Parameter	Description	Value/Range
Part Number	Linear Technology (now Analog Devices) part number	LTC1286CS8#PBF
Function	8-bit A/D Converter	Single-Supply, Low Power
Package Type	Surface Mount	SOIC-8
Supply Voltage Range	Operating voltage range	2.7V to 5.5V
Input Type	Analog input type	Single-Ended
Resolution	Resolution of the ADC	8 bits
Conversion Time	Time taken for one conversion	3.6 μs (max)
Interface	Communication interface type	SPI-Compatible
Operating Temperature	Temperature range for operation	-40°C to +85°C
Quiescent Current	Current consumption in quiescent state	150 μA (typical at 3V)
Power-down Mode	Feature to reduce power consumption	Yes, < 1 μA in shutdown mode

Instructions:

1. Power Supply Connection: Connect the supply voltage (VCC) between 2.7V and 5.5V to pin 8 and ground (GND) to pin 4.
2. Analog Input Connection: Connect the analog signal to be converted to pin 6 (AIN).
3. Digital Interface Setup: The device uses a SPI-compatible interface. Connect the serial clock (SCK) to pin 1, data out (DOUT) to pin 2, chip select (CS) to pin 3, and data in (DIN) to pin 5.
4. Initialization: Before starting conversions, ensure the device is properly powered and the digital interface is configured correctly.
5. Conversion Start: To start a conversion, bring CS low and provide a valid clock sequence on SCK.
6. Reading Data: After conversion, data can be read from DOUT by toggling the SCK line.
7. Power Management: For minimal power consumption, use the power-down feature by setting CS high.
8. Temperature Considerations: Ensure the operating temperature stays within -40°C to +85°C for reliable performance.

For detailed specifications and further information, refer to the official datasheet provided by Analog Devices.

(For reference only)