Details

---

BUY 2SC2240-BL - https://www.utsource.net/itm/p/12529440.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	60	V
Collector-Base Voltage	VCBO	-	-	70	V
Emitter-Base Voltage	VEBO	-	-	5	V
Collector Current	IC	-	1.5	3	A
Base Current	IB	-	-	0.3	A
DC Current Gain	hFE	20	100	300	-
Transition Frequency	fT	-	250	-	MHz
Power Dissipation	PT	-	-	65	W
Operating Temperature	TA	-55	-	150	°C
Storage Temperature	TSTG	-55	-	150	°C

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SC2240-BL with care to avoid mechanical damage.
   • Ensure that the device is properly mounted on a heat sink if operating at high power levels to prevent overheating.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply or load.
   • Connect the emitter (E) to the negative supply or ground.
   • Connect the base (B) to the control circuit.

3. Biasing:

   • Ensure that the base current (I_B) is within the specified range to achieve the desired collector current (I_C).
   • Use a suitable biasing network to maintain stable operation.

4. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed the maximum operating temperature.
   • Use thermal paste between the transistor and the heat sink for better thermal conductivity.

5. Protection:

   • Use appropriate overvoltage and overcurrent protection circuits to safeguard the transistor from transient conditions.
   • Consider using a snubber circuit if the transistor is used in high-frequency applications.

6. Storage:

   • Store the 2SC2240-BL in a dry, cool place away from direct sunlight and sources of heat.
   • Avoid exposure to corrosive environments.

7. Testing:

   • Before installing the transistor in a circuit, test its parameters using a multimeter or a transistor tester to ensure it meets the specified values.

8. Compliance:

   • Ensure that the use of the 2SC2240-BL complies with all relevant safety and regulatory standards.

(For reference only)